FRONT & REAR PANELS
Operation33 AC POWERConnect the unit with an AC Outlet using the provided cable to this socket. Power on when all other connections are done34 MASTER OUT 2Alternative Un-balanced Master Output using RCA cables35 MASTER OUTBalanced Master Output using XLR cables to connect with your amplifier/amplified speakers36 BOOTH OUTBooth Output using 1/4" TRS cables to connect with your monitor speakers37 USB A/BUse any of the 2 available USB ports to connect the DJM-S11 to a computer. See further details at the Back-to-Back section38 CH1/CH2 INPUTSUse the LINE/PHONO RCA inputs to connect a CD (or other Digital Media Player) or a Turntable. The sources connected to these Inputs can be selected from the Left (for CH1)/Right (for CH2) Source Selector at the top panel39 CDJ/CONTROLLERConnect compatible multi players or controllers.
Not recommended for storage devices connections. .If you turn input selector switches, devices are forcibly disconnected from any PC/Mac, so data on these devices may break. 40 MIC INPUTConnect a Microphone using a XLR or 1/4" TRS cable41 AUX INPUTConnect any Digital Media source to this additional input. Signal from this Input will directly routed to the Master Output. The level of this audio signal is controlled from the AUX LEVEL knob at the front panel of the unit
Operation42 MIC SECTIONAdjust the Level, High and Mid frequencies or apply an Echo FX to the Microphone Input (connection at the rear panel). Use the MIC On/Off switcher to turn the Microphone on/off. If the TALK OVER switcher is set to ON, the level of audio signal from the Master Output will be automatically reduced when Microphone is used 43 AUX LEVELAdjust the Level of the Auxiliary Input (input at the rear panel) 44 FEELING ADJAdjust the feeling of the Crossfader (how much strength is required to slide)45 CROSSFADER REVERSEReverse the blending behavior of the Crossfader.46 CROSSFADER CURVEAdjust the slope (blending curve) of the Crossfader.(from Smooth to Cut/Scratch)47 CH FADER CURVEAdjust the slope (curve) of the Channel Faders.(from Smooth to Cut/Scratch)48 CH FADER REVERSEReverse the fading behavior of the Channel faders.49 HEADPHONES SOCKETConnect your Headphones using a 1/8" or a 1/4" adapter. The level of this output is controlled from the top panel