Advanced Setup

The Pioneer DJM-250MK2 offers a built-in audio interface with 4 stereo Outputs and 4 stereo Inputs. The Inputs are determined by the Input Select switchers at the top panel of the unit.
The USB Output Channels can be set to different modes via the Pioneer DJM-250MK2 Setting Utility
How to open the DJM-250MK2 Utilities:

For Windows computer:
From VirtualDJ Settings AUDIO tab, click on the ASIO button,
or from Windows Desktop, click [START] menu [All Programs] [Pioneer] [DJM-250MK2 ] [Pioneer DJM-250MK2 Settings Utility]

For Mac OSX computer:
Click [MACINTOSH HD] icon [Applications] [Pioneer] [DJM-250MK2 ] [Pioneer DJM-250MK2 Settings Utility]

Timecode (DVS)

VirtualDJ is offering DVS (Digital Vinyl System) support for the Pioneer DJM-250MK2 . A Timecode Plus or Pro Infinity license is required. http://www.virtualdj.com/buy/index.html
Up to 2 Timecode Inputs are available to control any software decks via Timecode CDs or Vinyls.

Connect your Timecode devices at the rear panel of the Pioneer DJM-250MK2 to the Inputs 1,2 and/or 3,4 using the LINE or PHONO sockets depending on the connected device.
Make sure the Input switchers at the top panel are set to USB position.

Open the Pioneer DJM-250MK2 Setting Utility and set the USB Channel Outputs 1/2 and 3/4 to the appropriate mode.

In this example (as shown in the side picture), 2 Timecode Vinyls (turntables) have been connected to CH1 and CH2 PHONO Inputs

Close the Settings Utility

Open the AUDIO tab of VirtualDJ Settings and click on the TIMECODE button. VirtualDJ will then auto-create 2 Timecode Inputs.


Pioneer DJM-250MK2 – Audio Setup with 2 Timecode Inputs

Click to APPLY.

Press PLAY on your timecode CD and/or Vinyl device and VirtualDJ will automatically detect your Timecode type and make the appropriate adjustments for best performance.

Open the TIMECODE tab of the VirtualDJ Settings and choose the CALIBRATE button if for any reason the signal is not detected (possibly due to reversed phase connections).

Click on the ON buttons from the TIMECODE panels of the Default Skin to enable the Timecode control to any software deck.

Recording

The Pioneer DJM-250MK2 is offering a Record Output channel which by default is used to record your mix (and Aux/Mic Inputs) via VirtualDJ Record function.
Just make sure the USB 5/6 Output is set to REC from the Pioneer DJM-250MK2 Utilities

Pioneer DJM-250MK2 Audio Setup - Record Input

Pioneer DJM-250MK2 Utilities - REC OUT

Open the MASTER center panel of the VirtualDJ GUI and click to the REC button (or BCAST for broadcasting) to record your mix.

---

For further Technical features and specifications, visit
Pioneer DJM-250MK2
Product's Page

---

Hardware Integration Department 2019 - ATOMIX PRODUCTIONS


Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.