Hardware Manuals


Pioneer DJ - DDJ-RZX - Layout  

效果


The Left FX unit (FX1) controls the effects of the Left selected software deck (1 or 3) and the Right FX unit (FX2) controls the effects of the Right selected software deck (2 or 4) respectively.
Use the FX ASSIGN (41) buttons to clone (copy) the Effects from one deck to another.
Each one of the FX unit offers 2 modes. The Single Effect mode that offers one effect slot but more parameters controls per effect, and the Multi Effects mode that offers 3 effect slots (to trigger more than 1 effect at the same time – chained effects).

The selection between those 2 modes is done by pressing the FX MODE (67) button.


SINGLE EFFECT MODE



Single FX mode - 2 Decks Default skin


Single FX mode - 4 Decks Default skin


In this mode a single Effect is controlled with up to 6 Parameters and 4 Effect buttons. Only the first 2 Parameters are visible on the GUI. More Parameters and Effect buttons can be viewed in the FX GUI (opened from the + button on the GUI)

  1. FX1 knob. Controls the 1st effect parameter of the selected effect.
    Hold down Shift and turn the knob to control the 4th effect parameter of the selected effect (if available).

  2. FX2 knob. Controls the 2nd effect parameter of the selected effect (if available).
    Hold down Shift and turn the knob to control the 5th effect parameter of the selected effect (if available).

  3. FX3 knob. Controls the 3rd effect parameter of the selected effect (if available).
    Hold down Shift and turn the knob to control the 6th effect parameter of the selected effect (if available).

  4. FX1 ON. Enables/disables the selected effect.
    Hold down Shift and press this button to select the next available effect.

  5. FX2 ON. Enables/disables the 1st effect button of the selected effect (if available).
    Hold down Shift and press this button to enable/disable the 3rd effect button of the selected effect (if available).

  6. FX3 ON. Enables/disables the 2nd effect button of the selected effect (if available).
    Hold down Shift and press this button to enable/disable the 4th effect button of the selected effect (if available).


MULTI EFFECTS MODE



Multi FX mode - 2 Decks Default skin


Multi FX mode - 4 Decks Default skin


In this mode 3 different Effects can be applied and controlled with up to 2 Parameters for each FX slot. Only the first Parameter is visible on the GUI (and the 2nd Parameter while SHIFT is held on the DDJ-RZX). More Parameters and Effect buttons can be viewed in the FX GUI (opened from the + button on the GUI)

  1. FX1 knob. Controls the 1st effect parameter of the selected effect of slot 1.
    Hold down Shift and turn the knob to control the 2nd effect parameter of the selected effect of slot 1 (if available).

  2. FX2 knob. Controls the 1st effect parameter of the selected effect of slot 2.
    Hold down Shift and turn the knob to control the 2nd effect parameter of the selected effect of slot 2 (if available).

  3. FX3 knob. Controls the 1st effect parameter of the selected effect of slot 3.
    Hold down Shift and turn the knob to control the 2nd effect parameter of the selected effect of slot 3 (if available).

  4. FX1 ON. Enable/disable the selected effect of slot 1.
    Hold down Shift and press this button to select the next available effect for slot 1.

  5. FX2 ON. Enable/disable the selected effect of slot 2.
    Hold down Shift and press this button to select the next available effect for slot 2.

  6. FX3 ON. Enable/disable the selected effect of slot 3.
    Hold down Shift and press this button to select the next available effect for slot 3.


RELEASE FX


  1. RELEASE FX LEVER. This lever offers two scales of engagement.
    Push this lever downwards briefly to activate a release effect with short strength / duration.
    Push this lever downwards all the way to the end to activate a release effect with maximum strength / duration.

    Release Effects are special effects that act on a slip fashion and stop the deck's playback.
    The available Release Effects at the time this manual was written are Backspin, BrakeStart and Loop Out


OTHER FX KEYS


  1. EFFECT TIME. This encoder is not used by VirtualDJ

  2. EFFECT BEATS. Press these buttons to decrease or increase the value of the Beats length for the selected Effect (only for effects that offer this feature).

Touch Screens