powermixx
I used to have the EFX (4 of them) buttons for each deck programmed for the following effects:
EFX1 - Beat Grid
EFX2 - Loop Out
EFX3 - Backspin
EFX4 - Brake
The controller Denon DN-MC6000 selection appears to show the proper actions, but the buttons aren't working. For example, the action for the left deck EFX1 shows:
EFX1_BTN_LEFT
effect 'beatgrid' activate
The button doesn't light up and the effect isn't working. Any suggestions please?
EFX1 - Beat Grid
EFX2 - Loop Out
EFX3 - Backspin
EFX4 - Brake
The controller Denon DN-MC6000 selection appears to show the proper actions, but the buttons aren't working. For example, the action for the left deck EFX1 shows:
EFX1_BTN_LEFT
effect 'beatgrid' activate
The button doesn't light up and the effect isn't working. Any suggestions please?
发表时间 Sat 20 Aug 16 @ 2:48 pm
locoDog
That's v7 syntax,
effect_active 'name'
Check the mapping window it gives the full syntax as you'll need to include slot assignment
effect_active 'name'
Check the mapping window it gives the full syntax as you'll need to include slot assignment
发表时间 Sat 20 Aug 16 @ 2:55 pm
powermixx
locodog wrote :
That's v7 syntax,
effect_active 'name'
Check the mapping window it gives the full syntax as you'll need to include slot assignment
effect_active 'name'
Check the mapping window it gives the full syntax as you'll need to include slot assignment
Can you help me? What do you mean check the mapping window?
发表时间 Sun 21 Aug 16 @ 4:14 pm
locoDog
the controller section, where you do the mapping, where you assign script to buttons.
发表时间 Sun 21 Aug 16 @ 4:27 pm
powermixx
I found this helpful video:
https://www.youtube.com/watch?v=vKm0vdj7xxk
At 5:00 in the video, he shows how to program a button (on a different controller) to the backspin effect. That's one that I'm wanting to map for my MC6000 EFX button:
Old VDJ7 syntax:
effect 'backspin' activate
VDJ8 syntax:
backspin
Yet, the button still does not light up nor does the effect work.
Still trying...
https://www.youtube.com/watch?v=vKm0vdj7xxk
At 5:00 in the video, he shows how to program a button (on a different controller) to the backspin effect. That's one that I'm wanting to map for my MC6000 EFX button:
Old VDJ7 syntax:
effect 'backspin' activate
VDJ8 syntax:
backspin
Yet, the button still does not light up nor does the effect work.
Still trying...
发表时间 Sun 21 Aug 16 @ 4:39 pm
locoDog
powermixx wrote :
VDJ8 syntax:
backspin
backspin
Not V8 syntax either
effect_active 3 'backspin'
3 puts the effect on slot 3 which with make the 3rd light work.
http://www.virtualdj.com/wiki/VDJscript_verbs_v8..html
发表时间 Sun 21 Aug 16 @ 4:55 pm
powermixx
I sure do appreciate the replies to help me. I tried that last one, but still no luck. But I'm checking out that reference you listed, it's a good one.
发表时间 Sun 21 Aug 16 @ 5:11 pm
powermixx
Anyone have any other suggestions as to the proper syntax to get the Denon MC6000 EFX buttons programmed?
发表时间 Sun 21 Aug 16 @ 10:19 pm
locoDog
effect_active 1 'beat grid'
effect_active 2 'loop out'
effect_active 3 'backspin'
effect_active 4 'BrakeStart'
effect_active 2 'loop out'
effect_active 3 'backspin'
effect_active 4 'BrakeStart'
发表时间 Mon 22 Aug 16 @ 3:26 am