The Magic.DJ
how can I fade the sound from the Sampler ?
I want to Fade the sample instead of a instant cut off (stop).
I want to Fade the sample instead of a instant cut off (stop).
发表时间 Thu 20 Aug 15 @ 4:03 pm
VDJ Ron
If you have a spare knob or fader on maybe a sampler sub controller just assign "sampler_master_volume".
That will fade whatever samples are active.
That will fade whatever samples are active.
发表时间 Thu 20 Aug 15 @ 4:30 pm
The Magic.DJ
I want to just press a key (map script).
Thanks.
Thanks.
发表时间 Thu 20 Aug 15 @ 4:45 pm
jc265
This is what I bought the software for. I need to fade out tracks (over 5 sec or so) from the sampler with a single button press on my launchpad. Can anyone help?
发表时间 Sat 19 Dec 15 @ 9:59 pm
SBDJ
repeat_start_instant 'fadesampler' 50ms & sampler_volume_master 0% ? repeat_stop 'fadesampler' : sampler_volume_master -1%
Every 0.05 seconds, reduce the sampler master volume by 1%. Once it reaches 0%, stop the script. From 100% volume to 0%, over 5 seconds :)
发表时间 Sat 19 Dec 15 @ 10:50 pm
jc265
SBDJ wrote :
Every 0.05 seconds, reduce the sampler master volume by 1%. Once it reaches 0%, stop the script. From 100% volume to 0%, over 5 seconds :)
repeat_start_instant 'fadesampler' 50ms & sampler_volume_master 0% ? repeat_stop 'fadesampler' : sampler_volume_master -1%
Every 0.05 seconds, reduce the sampler master volume by 1%. Once it reaches 0%, stop the script. From 100% volume to 0%, over 5 seconds :)
Oh man, you got me so close to where I need to be!! Is there a way to make it stop playback after the fade out and put the volume back to 100% in preparation for the next sample to be played?
I tried adding sampler_stop & sampler_volume_master 100% to the end but it didn't work :(
发表时间 Sat 19 Dec 15 @ 11:08 pm
locoDog
started looking at the problem, i think it best you actually post what you have as your best guess, it helps narrow the down to the correct answer.
发表时间 Sun 20 Dec 15 @ 1:26 am
jc265
locodog wrote :
started looking at the problem, i think it best you actually post what you have as your best guess, it helps narrow the down to the correct answer.
I made a macro on my launchpad with the line that SBDJ posted. It works to fade the song out but no other samples can be played. As I don't know what I'm doing I added "sampler_stop & sampler_volume_master 100%" to the end of the line. It just stops the sample, no fade out.
I made another macro with just "sampler_stop & sampler_volume_master 100%" and that works to stop the track and put the volume back, but it creates a pop sound every time.
I would like to have one button fade the song out, stop the sample and put the sample volume back to 100%.
发表时间 Sun 20 Dec 15 @ 2:41 am
The Magic.DJ
I still use Jingle Palette.
I'm trying to make VDJ act like that program (for the samples).
Still haven't found a reasonable solution (meaning it could be done but cumbersome). I need it to be as easy as JP.
I'll try playing with the script listed above.
I'm trying to make VDJ act like that program (for the samples).
Still haven't found a reasonable solution (meaning it could be done but cumbersome). I need it to be as easy as JP.
I'll try playing with the script listed above.
发表时间 Sun 20 Dec 15 @ 4:03 pm
PhantomDeejay
SBDJ wrote :
Every 0.05 seconds, reduce the sampler master volume by 1%. Once it reaches 0%, stop the script. From 100% volume to 0%, over 5 seconds :)
repeat_start_instant 'fadesampler' 50ms & sampler_volume_master 0% ? repeat_stop 'fadesampler' : sampler_volume_master -1%
Every 0.05 seconds, reduce the sampler master volume by 1%. Once it reaches 0%, stop the script. From 100% volume to 0%, over 5 seconds :)
repeat_start_instant 'fadesamplerX' 50ms & sampler_volume_nogroup X 0% ? repeat_stop 'fadesamplerX' & sampler X stop & sampler_volume_nogroup X 100% : sampler_volume_nogroup X -1%
Where X is the number of the slot!
This will do the same as original script by SBDJ with the following additions:
1) Each sample will fade out individually
2) It will stop the sample and reset it's volume at the end
发表时间 Mon 21 Dec 15 @ 11:07 am
SamTheRecordMan
Is there a way to setup a button to fade the master volume and then stop the sample playback and reset volume to 100%.
repeat_start_instant 'fadesamplerX' 50ms & sampler_volume_nogroup X 0% ? repeat_stop 'fadesamplerX' & sampler X stop & sampler_volume_nogroup X 100% : sampler_volume_nogroup X -1%
This script will do that per sample but I would like one button to perform that action for any sample I press. I would be playing one sample at a time.
Thanks for any help!
repeat_start_instant 'fadesamplerX' 50ms & sampler_volume_nogroup X 0% ? repeat_stop 'fadesamplerX' & sampler X stop & sampler_volume_nogroup X 100% : sampler_volume_nogroup X -1%
This script will do that per sample but I would like one button to perform that action for any sample I press. I would be playing one sample at a time.
Thanks for any help!
发表时间 Mon 17 Sep 18 @ 7:07 pm
klausmogensen
You got it backwards
When you say "the sample you press" - that's where you need to put the script instead of the default script that just plays the sample
Like on a pad page
But I think we've already been through this in the previous post you did about it
When you say "the sample you press" - that's where you need to put the script instead of the default script that just plays the sample
Like on a pad page
But I think we've already been through this in the previous post you did about it
发表时间 Mon 17 Sep 18 @ 9:01 pm
SamTheRecordMan
Klausmogensen, Thanks again! yes the code you gave me did work but requires I make one button for fade in of a sample then one button for fade out of a sample. Here is the problem im facing, im doing introductions at a wedding, there each member of the wedding party wants to be introduced to a different song, each song has a different start position as to capture the course of the song as they are introduced, so I need like 10 to 12 different songs, if I had to make 2 buttons for each song that's a lot of buttons and on the skin these custom buttons are tiny. I like the sampler button page where they are nice and big buttons and I can expand the pallet to make it bigger, the problem is I can't assign any of the scripting to those buttons. I can drag each of the songs to a new sampler bank and set the custom start times in the sample editor, I don't need it to fade up so much as fade out. I know I could do that with the mouse and the fader bar next to each sample on the list view, or assign the playback to a deck and use that fader bar, just trying to automate this process a little so as im reading names and moving the bridal party along, I can trigger the music and fade out with just a tap and not having to work a fader on the screen or controller. Sorry for the long explanation, but maybe some contect will help figure something out:-) I do appreciate all the help you guys are awesome!
发表时间 Tue 18 Sep 18 @ 11:36 am
SamTheRecordMan
repeat_start_instant 'fadesamplerX' 50ms & sampler_volume_master 0% ? repeat_stop 'fadesamplerX' & sampler_stop all & sampler_volume_master 100% & sampler_volume all 100% : sampler_volume_master -5%
This seams to do what I need but there is a pop when it resets the sampler volume?
This seams to do what I need but there is a pop when it resets the sampler volume?
发表时间 Tue 18 Sep 18 @ 3:21 pm