Geist0
Hi habe den Treiber für das DJ4 Set genau wie in der Anleitung beschrieben installiert, leider zeigt der Windows8 Gerätemanager bei den Hercules DJ4Set treibern (Asio etc.), das folgende an:
Der Prozess zum Hinzufügen von Dienst HDJAsioK für Geräteinstanz-ID USB\VID_06F8&PID_B10C&MI_04\7&22E2EF9B&0&0004 wurde mit folgendem Status beendet: 0.
Habe alle USB-Ports und ein externes HUB mit Stromversorgung ausprobiert.
Weis jmd. Rat wie ich den Controller zum laufen bekomme.
Das Laptop ist ein Insperion 16z.
LG
Der Prozess zum Hinzufügen von Dienst HDJAsioK für Geräteinstanz-ID USB\VID_06F8&PID_B10C&MI_04\7&22E2EF9B&0&0004 wurde mit folgendem Status beendet: 0.
Habe alle USB-Ports und ein externes HUB mit Stromversorgung ausprobiert.
Weis jmd. Rat wie ich den Controller zum laufen bekomme.
Das Laptop ist ein Insperion 16z.
LG
发表时间 Thu 02 Jan 14 @ 6:38 am
Braenzu
DJ Cyder wrote :
This is just an fyi out there to those that might be considering updating to windows 8.1.
Certain computers using Usb3 are affected by this but most notably those using this controller as listed here in device manager
[IMAGE1]
If you have this I highly recommend NOT updating your main system due to some devices will become unusable (unknown). Some devices currently DO NOT WORK with Microsoft stack on the Intel USB 3.0 host controller. Personally I verified this fact using a djconsole. Luckily there is a fix if you already updated and you find your new device now useless. Its pretty involved I've briefed the support team on this issue and they do know how to fix it as well. Follow this link for a fix advanced users only for this it involes basically forcing the intel driver over the ms driver. I can also confirm this does work as a fix at least in my case it did.
Certain computers using Usb3 are affected by this but most notably those using this controller as listed here in device manager
[IMAGE1]
If you have this I highly recommend NOT updating your main system due to some devices will become unusable (unknown). Some devices currently DO NOT WORK with Microsoft stack on the Intel USB 3.0 host controller. Personally I verified this fact using a djconsole. Luckily there is a fix if you already updated and you find your new device now useless. Its pretty involved I've briefed the support team on this issue and they do know how to fix it as well. Follow this link for a fix advanced users only for this it involes basically forcing the intel driver over the ms driver. I can also confirm this does work as a fix at least in my case it did.
http://www.virtualdj.com/forums/182934/General_Discussion/Read_This_before_you_update_to_Windows_8_1.html
Braenzu
发表时间 Thu 02 Jan 14 @ 6:44 am