lick0the0fish
Hi All
Relatively new to both digital djing, and indeed, virtual dj itself. I have a few issues with my recently purchased Hercules 4MX and the Virtual DJ mappings...
Currently my set up is this
Hercules 4MX
Virtual DJ 7 (trial at the moment) MAC version
2 x Gemini direct drive turntables plugged into the 4mx into inputs 1/2 and 3/4 (ground wires connected)
The output from the 4mx goes to my home cinema amp - no issues there.
The issues are as follows:
Turntables are very, very quiet. I have to have the gain on 100% and all of the audio knobs turned to full and still the sound isn't right. Anyone got an idea what I'm doing wrong?
Secondly, when I press the "source 1" or "source 2" button, it allocates linein1 to whichever deck I press. However, here in is the problem. I cant allocate linein2 to any of the decks!!!
Please can someone point me in the direction to:
A: correctly assign linein1 to deck A/C and linein2 to deck B/D
B: advise why the sound is so quiet from the decks? I could run it through a mixer first but this wouldnt enable me to properly mix 2 digital decks and 2 physical decks (which is what I want to do...)
Any help would be amazing as this is making me want to throw the whole lot out of the window!!!
Relatively new to both digital djing, and indeed, virtual dj itself. I have a few issues with my recently purchased Hercules 4MX and the Virtual DJ mappings...
Currently my set up is this
Hercules 4MX
Virtual DJ 7 (trial at the moment) MAC version
2 x Gemini direct drive turntables plugged into the 4mx into inputs 1/2 and 3/4 (ground wires connected)
The output from the 4mx goes to my home cinema amp - no issues there.
The issues are as follows:
Turntables are very, very quiet. I have to have the gain on 100% and all of the audio knobs turned to full and still the sound isn't right. Anyone got an idea what I'm doing wrong?
Secondly, when I press the "source 1" or "source 2" button, it allocates linein1 to whichever deck I press. However, here in is the problem. I cant allocate linein2 to any of the decks!!!
Please can someone point me in the direction to:
A: correctly assign linein1 to deck A/C and linein2 to deck B/D
B: advise why the sound is so quiet from the decks? I could run it through a mixer first but this wouldnt enable me to properly mix 2 digital decks and 2 physical decks (which is what I want to do...)
Any help would be amazing as this is making me want to throw the whole lot out of the window!!!
发表时间 Wed 24 Oct 12 @ 3:11 pm
RobRoy
how does your advanced config looks like..?
发表时间 Thu 25 Oct 12 @ 10:17 am
lick0the0fish
it seems its only linein 1 which is affected by the quiet input. linein 2 is fine now (i figured out you can only assign to deck a/b not c/d)
pluggin the phono cables into input 2 gives me clear normal sound. input 1 gives me very quiet crackly sound...
Is the 4mx broken?
pluggin the phono cables into input 2 gives me clear normal sound. input 1 gives me very quiet crackly sound...
Is the 4mx broken?
发表时间 Thu 25 Oct 12 @ 11:48 am
DJ Phatso
You might want to take a look at this document:
http://ts.hercules.com/faqs/eng/her_eng_00415.pdf
My guess is that the input level is different for Input 1-2 and 3-4.
http://ts.hercules.com/faqs/eng/her_eng_00415.pdf
My guess is that the input level is different for Input 1-2 and 3-4.
发表时间 Thu 25 Oct 12 @ 3:01 pm