登录:     

Forum: General Discussion

Topic: help seting up timecode video

由于该帖子已年深日久，可能包含陈旧过时或描述错误的信息。

ok so i have looked at all info and not getting it . so can someone tell me how to set up time code video control.

i have a MAC, 2 1200's, a DJM-T1 mixer , and an audio 6 traktor box.

currently when i go to time code set up i get no signal. please if you can take me step by step on what inputs and out puts i should be using ect
 
发表时间 Sat 09 Jun 12 @ 11:44 am
no answer so i guess i will just go out and get serato video this weekend.... thanks anyways
 
 
thats the problem i read all that and still not up and running... i thought maybe someone could give me a hand but seems it just may not be in the cards for me to use vdj anymore
 
have u been successful with setting up time code audio?
 
no
 
 
All u should have to do is plug the rca leads of turntables into the phono input of the mixer. Then on the mixer make sure u have your input selection on USB. U also need your mixer plugged in to ur laptop via USB...

Let me know if u get that far.

Other things to consider would be to make sure the pioneer software utility application is installed on ur mac. I have a djm 900 and I am needed to install that software. There are settings in there too for each channel. Make sure each channel on the mixer is set to USB within the pioneer software.

Any more details about ur situation would be helpful also...
 
i have been djing for awhile so the basic setup is fine...... going to check the pioneer setup and report back
 
 
apedrotte wrote :
All u should have to do is plug the rca leads of turntables into the phono input of the mixer. Then on the mixer make sure u have your input selection on USB. U also need your mixer plugged in to ur laptop via USB...

Let me know if u get that far.

Other things to consider would be to make sure the pioneer software utility application is installed on ur mac. I have a djm 900 and I am needed to install that software. There are settings in there too for each channel. Make sure each channel on the mixer is set to USB within the pioneer software.

Any more details about ur situation would be helpful also...


wait are you saying i dont need the audio 6 in the chain????
 
I don't have that mixer yet, it'll be here next week, but try setting it up just using the mixers soundcard. It should work from what I've been told. Really wish mine was here!!
 
ok i got some gigs the next two days will give it a go... thanks
 
Yeah... no need for the audio 6. I'm not 100% positive because I don't have the exact same mixer as u but I do have the djm 900 which is similar. I used to use an audio 8 but don't need it any more
 
You get sorted yet bro??
 
nope not at all
 


(陈旧帖子或论坛版块会自动关闭)