MIXER & BROWSER CONTROLS
SHIFT (SECONDARY) ACTIONS SHIFTPress this button down to access secondary actions as described in the SHIFT ACTION column 1 CROSSFADERBlends audio signals between decks assigned to left and right sides 2 X-FADE ASSIGNAssign decks to Left or Right side of the crossfader. When both XFADE buttons for a deck are off, the crossfader will not affect the output of a deck (THRU)Assign decks as Left or Right side of the Video Crossfader. When all Video X-FADE buttons are off, VirtualDJ will use the Left assigned Deck and the Right assigned Deck as Left and Right for the Video crossfader3 PC/LINELed Indicators for Source status of Mixer Channels 3 and 4. Source selection is done via the SOURCE buttons at the front panel of the N4 4 VOLUMEAdjust the Volume of each mixer channel 5 CUE/PFLSend Channel's pre-fader audio signal to the Headphones Channel (for pre-listening)lSelect the pre-fader audio signal of a Deck as the VU-Meters indicator. If none is selected, the VU-meters will indicate the Master Output Level6 BASSAdjust the Low (Bass) Equalizer Band of each mixer channel 7 MIDAdjust the Middle Equalizer Band of each mixer channel 8 TREBLEAdjust the High (Treble) Equalizer Band of each mixer channel 9 GAINAdjust the applied Gain (post-fader) of each mixer channel 10 LOADLoad the selected track in Browser to Decks 1 to 4.
Hold down for more than 1 second to unload the same deckManually set a Deck as Master Deck (so that all other decks to sync on this one)
Hold down for more than 1 second to set Master Deck selection back to Auto mode (VirtualDJ will be automatically selecting the Master Deck depending on which deck is out on Master Output
Leds above the LOAD buttons will indicate the selected Master Deck and will blink if the Manual Master Deck selection mode is selected.11 BROWSEScroll through files or folders
Push to toggle focus between the Folders and the Songs ListSelect a Video Transition
Push to set focus to the Folders List. If focus is in Folders list, push to expand/collapse sub-folders12 CUE MIXSet Master Output audio signal when in maximum MIX position.
Send the audio signal from decks that have the CUE/PFL enabled to the Headphones channel when in minimum CUE position.
Blends audio signal from Master and Decks in all other middle positions 13 CUE VOLAdjust the Output Volume of the Headphones channel 14 BOOTH VOLAdjust the Volume of the Booth Output (connection at the rear) 15 MASTER VOLAdjust the Volume of the Master Output (connection at the rear) Decks