Hardware Manuals


Numark|露玛克 - N4 - Layout  

FRONT & REAR PANELS





KEY

DESCRIPTION

39 MIC 1 GAIN
Adjust the level of the MIC1 Microphone Input
40 MIC 1 SOCKET
Connect a Microphone to this socket using a 1/4" cable/adapter
41 MIC 2 SOCKET
Connect an additional Microphone to this socket using a 1/4" cable/adapter
42 MIC 2 GAIN
Adjust the level of the MIC2 Microphone Input
43 MIC EQ
Adjust the Low and High Equalizer Bands of both the Microphone Inputs
44 MIC ON/OFF
Turn the Microphone Inputs on/off
45 SOURCE PC/LINE
Select the source sent to Mixer Channels 3 and 4. When in LINE position, the audio signal of the sources connected at the rear INPUTS will be routed to Mixer Channels 3 and 4. VirtualDJ Decks 3 and 4 will be muted in this case
When in PC position, the VirtualDJ Decks will be routed to those Mixer Channels
Led Indicators of the Source status available at the top panel
46 CF CONTOUR
Choose between Scratch/Cut and Smooth/Normal mode for the slope of the crossfader.
47 HEADPHONES SOCKET
Connect your Headphones using a 1/4" or a 1/8" cable or adapter





48 POWER
Connect the provided AC/DC Power Adapter and power on the unit with the Switch button
49 USB
Connect the N4 with a USB port of your computer using the provided USB cable
50 USB IN/TIMECODE
Set to TIMECODE position to route the Inputs to the USB Audio Interface (for DVS/timecode use)
51 MASTER OUT (XLR)
Connect your amplifier or your amplified speakers to these sockets using proper XLR cables. The Level of this Output is controlled by the Master Vol knob at the top panel of the unit
52 MASTER OUT (RCA)
Connect your amplifier or your amplified speakers to these sockets using proper RCA cables The Level of this Output is controlled by the Master Vol knob at the top panel of the unit
53 BOOTH OUT (RCA)
Alternative Output to connect speakers for monitoring using proper RCA cables The Level of this Output is controlled by the Booth Vol knob at the top panel of the unit
54 INPUTS 1/2
Connect external media sources such as Turntables, Cd Players, Media Players etc. Set the LINE/PHONO switchers to the appropriate position, depending on the source type. The routing of these inputs to the Mixer or the USB Interface depends on the SOURCE select and USBIN/TIMECODE switchers that the front panel of the unit







For further Technical features and specifications, visit

Numark N4
Product's Page







Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.