I have probem with the time coded vinyl. It does keep signal @ 100%.
Sometime it stops giving signal. I try to go on the auto confidure it, and it just shut down. I also hve hercule dj control mp3. When vdj stops and shut off, the light in the control stays on.
This message show up in the report
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: kHW_IntelGMA965Item, GMA X3100, spdisplays_builtin, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (4.170.46.5)
Bluetooth: Version 2.1.0f16, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 149.05 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, Micron, high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Hercules DJ Control MP3, Hercules, full_speed, 500 mA
USB Device: MAYA44 USB, AUDIOTRAK, full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
FireWire Device: My Book, WD, 400mbit_speed
Is there anything i'm doing bad?
Sometime it stops giving signal. I try to go on the auto confidure it, and it just shut down. I also hve hercule dj control mp3. When vdj stops and shut off, the light in the control stays on.
This message show up in the report
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: kHW_IntelGMA965Item, GMA X3100, spdisplays_builtin, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (4.170.46.5)
Bluetooth: Version 2.1.0f16, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 149.05 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, Micron, high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Hercules DJ Control MP3, Hercules, full_speed, 500 mA
USB Device: MAYA44 USB, AUDIOTRAK, full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
FireWire Device: My Book, WD, 400mbit_speed
Is there anything i'm doing bad?
发表时间 Thu 29 May 08 @ 1:22 pm
The time coded vinyl it's not working on V5.0.8
We have to wait.
I have the same problem as you.
We have to wait.
I have the same problem as you.
发表时间 Thu 29 May 08 @ 2:09 pm
so that's it. oh my good. I'm really getting impatient now.
发表时间 Fri 30 May 08 @ 11:23 am
really? I am getting no signal at all into VDJ (the lights on my MAYA 44 USB showing that they recieve the signal)
But when I configure the TC, and click on ok, it suddenly closes .
I am using timecode CD's on CDJ800, as stated above a MAYA 44 USB and a MacBook 1,1 with Intel Core 2 Duo 2 GHz processor
So Sky, I followd your advice and got me a C2D Mac, and now I would like it to have it work =P
Is maybe that Bootcamp that I see everywhere an option? That wat I can install the XP version on my Mac or something like that? Should that work better?
But when I configure the TC, and click on ok, it suddenly closes .
I am using timecode CD's on CDJ800, as stated above a MAYA 44 USB and a MacBook 1,1 with Intel Core 2 Duo 2 GHz processor
So Sky, I followd your advice and got me a C2D Mac, and now I would like it to have it work =P
Is maybe that Bootcamp that I see everywhere an option? That wat I can install the XP version on my Mac or something like that? Should that work better?
发表时间 Wed 04 Jun 08 @ 3:08 am
On XP works fine.
You better use bootcamp till the new version comes if you want to use TCCD or TCV.
You better use bootcamp till the new version comes if you want to use TCCD or TCV.
发表时间 Wed 04 Jun 08 @ 8:57 am
So I need Mac OS X 10.5 for that don't I?
Now I have 10.4.11 :)
Now I have 10.4.11 :)
发表时间 Wed 04 Jun 08 @ 3:14 pm
xonor wrote :
On XP works fine.
You better use bootcamp till the new version comes if you want to use TCCD or TCV.
You better use bootcamp till the new version comes if you want to use TCCD or TCV.
I can vouch for that. I used bootcamp yesterday with the new version & I have to say I was very, very, very impressed. I'm an SSL user & I was really impressed with the improvement & stability. (knock on wood). I still need to some more extensive testing to see what I get before I officially make the switch back to VDJ. I just hope it stays stable.
It was just for testing purposes though. I deleted the Windows partition shortly after cause it's not quite working with my set up as I need to have 3 partitions & it won't let me.
If you have one partition on your system, I'd strongly suggest u use bootcamp. I'm really looking forward to testing the new mac version but I doubt it will be as stable as the windows version.
发表时间 Wed 04 Jun 08 @ 4:38 pm
secret_lover wrote :
so that's it. oh my good. I'm really getting impatient now.
Sit back and relax while you're waiting, because it could be awhile. I've been patiently waiting since November.
发表时间 Thu 05 Jun 08 @ 3:08 am
I installed windows xp using boot camp. I'm not sure how stable virtual dj is going to be. Have anyone tried it for a long time?
发表时间 Thu 05 Jun 08 @ 6:34 pm
Im a new Macbook user. Version 10.5.2 pr ocessor is 2.4 GHz Intel Core 2 Duo, Memory is 2 GB 667 MHz DDR2 SDRAM. I'm using a Synchroscience Conectiv
In-Out Card (by M-Audio, made for Torq which performs very, very slow). I'm trying to use Virtual DJ 5.0.8.
I use Pioneer cdj 800's with time coded cds. I had no problem with Auto-Configuring the time coded cd's. I just purchased 2 time coded vinyl's from the Virtual DJ Site.
Everytime I Auto-Configure or manually configure the vinyls, Virtual Dj crashes. Does Virtual DJ really work like it's supposed to? What can I do to get this vinyl to work?
Do I have to go buy Serato? Any information would be helpful. I'm tired of troubleshooting. For all the money we spend, I just feel we should have a product that works!
In-Out Card (by M-Audio, made for Torq which performs very, very slow). I'm trying to use Virtual DJ 5.0.8.
I use Pioneer cdj 800's with time coded cds. I had no problem with Auto-Configuring the time coded cd's. I just purchased 2 time coded vinyl's from the Virtual DJ Site.
Everytime I Auto-Configure or manually configure the vinyls, Virtual Dj crashes. Does Virtual DJ really work like it's supposed to? What can I do to get this vinyl to work?
Do I have to go buy Serato? Any information would be helpful. I'm tired of troubleshooting. For all the money we spend, I just feel we should have a product that works!
发表时间 Sun 15 Jun 08 @ 11:35 am