快速登录:  

Forum: VirtualDJ Technical Support

话题: dvs old skool.

由于该帖子已年深日久,可能包含陈旧过时或描述错误的信息。

hh73PRO InfinityMember since 2006
i bought a pioneer djm 500 on ebay for 200 bucks. this was my first mixer and i needed just a plain mixer without do dads and digital. is it still possible to set up dvs like back in the day? i think i used a maya 44 usb, connected to the laptop, vdj 7, and just two decks. is this still possible? i have the newest serato time code vinyls.
 

发表时间 Fri 24 Mar 17 @ 7:49 pm
SBDJPRO Infinity Member since 2006
Yes, although I wouldn't recommend a Maya44 as they are line level inputs rather than phono (unless your turntables have line level outputs of course).
 

发表时间 Sat 25 Mar 17 @ 12:59 am
hh73PRO InfinityMember since 2006
yeah they are numark ttx usb. with phono and line. with line i can use the keylock and some other things. but theres always issues. can you recommend a soundcard no more than 300 bucks that would work well?
 

发表时间 Sat 25 Mar 17 @ 7:54 am
Man maya 44 is old skull, was my first sound card back in 90's. Can you please use something else even that Numark DJ IO is better, I remember sound output being so low.
 

发表时间 Sat 25 Mar 17 @ 9:07 pm
hh73PRO InfinityMember since 2006
i just asked the dude for a recommendation for a better one lol. im not going to get another maya ;)
 

发表时间 Sun 26 Mar 17 @ 9:33 am
hh73PRO InfinityMember since 2006
been looking all day online for a maya type card. the connectors are either xlr, or are 500 bucks. ::( there must be an easier way. any ideas?
 

发表时间 Sun 26 Mar 17 @ 12:38 pm
AdionPRO InfinityCTOMember since 2006
Since the turntables already have usb, you don't need anything else, just plug them into your computer, and in audio config select the TTX's for timecode inputs.

I don't think they have ASIO drivers, so if the latency is too high by default, you may need to set exclusiveAudioAccess to yes and try different latency values to find a good setting.

Edit: For any timecode use, also remember that you should not use the keylock on the device, since that will deform the timecode signal making it more difficult to correctly detect.
If you want to switch key lock on or off, do it in virtualdj and keep the keylock on the turntable/cd player off.
 

发表时间 Sun 26 Mar 17 @ 12:41 pm
hh73PRO InfinityMember since 2006
just read in the wiki here not to use tts with built in sound cards although i think its ok. i found a hercules dj trim on ebay new. seems to be what i need. we will see. otherwise
ill try it your way. thanks
 

发表时间 Sun 26 Mar 17 @ 12:48 pm
AdionPRO InfinityCTOMember since 2006
Not sure why that recommendation is there.Only thing that might be an issue is latency, but even that I doubt.
 

发表时间 Sun 26 Mar 17 @ 12:51 pm
hh73PRO InfinityMember since 2006
the ttxs do have asio i think have asio. when i ripped vinyls if i recall. but the laptop gets confused when both ttxs are plugged in :) sigh. if i use line i can use the googies like keylock. which works well within the plus or minus 4 range. but the software already does that much better. so its no biggie. thats why i sold my traktor stuff. decks would only work with line mode. but what if you wanna play a regular vinyl during the set. switching over was a disaster.

 

发表时间 Sun 26 Mar 17 @ 12:53 pm
hh73PRO InfinityMember since 2006
from the vdj wiki. maybe it wasnt updated in a while since so many people use midi controllers?


You can use traditional vinyl turntables or CD players to control VirtualDJ by using timecode. To do this, you will need the following:

A Pro Infinity, Pro subscription or Plus Timecode license .
(The FREE version and all other licenses allow timecode to be tried out for the first 10 minutes of use only.)

A suitable ASIO (PC) or CoreAudio (Mac) sound card with at least 4 inputs and 4 outputs (2 stereo), such as Hercules DJ Trim. ESI Maya44 USB, Rane SL etc.

NOTE: The sound card built into USB vinyl turntables is not suitable - This is intended for 'ripping' vinyl to MP3 only, not DJ performance. A proper low latency sound card designed for DJ timecode use is required.

VirtualDJ Timecode vinyl records* or timecode CD's.
Alternatively, you may use nearly every timecode vinyl records on the market (Serato, Traktor, Mixvibes etc). You should find these at your local DJ store or they can be purchased on-line from a variety of DJ stores.
*Requires VirtualDJ 8 or later

If using vinyl decks, direct drive turntables are strongly recommended (Belt-driven are not well suited to DJ performance, especially scratching.)
 

发表时间 Sun 26 Mar 17 @ 12:56 pm
hh73PRO InfinityMember since 2006
hh73 wrote :
the ttxs do have asio i think have asio. when i ripped vinyls if i recall. but the laptop gets confused when both ttxs are plugged in :) sigh. if i use line i can use the goodies like keylock. which works well within the plus or minus 4 range. but the software already does that much better. so its no biggie. thats why i sold my traktor stuff. decks would only work with line mode. but what if you wanna play a regular vinyl during the set. switching over was a disaster.



 

发表时间 Sun 26 Mar 17 @ 12:57 pm
hh73PRO InfinityMember since 2006
 

发表时间 Sun 26 Mar 17 @ 12:59 pm
hh73PRO InfinityMember since 2006
i mix house. no scratching so latency is important. but not as big an issue if was a turntablist.
 

发表时间 Sun 26 Mar 17 @ 1:00 pm
AdionPRO InfinityCTOMember since 2006
The DJ-Trim should be fine as well, but since you already have the turntables, I would give it another try with USB directly.
When selecting WASAPI it should be no problem even when you connect 2 at the same time.
 

发表时间 Sun 26 Mar 17 @ 1:04 pm
hh73PRO InfinityMember since 2006
ok will do. yeah asio isnt kind anymore. wasabi i what i use with AIMP when listening to regular music on the pc. the windows 10 sound "engine" is pretty good.
 

发表时间 Sun 26 Mar 17 @ 1:10 pm
hh73PRO InfinityMember since 2006
hh73 wrote :
ok will do. yeah asio isnt king anymore. wasabi i what i use with AIMP when listening to regular music on the pc. the windows 10 sound "engine" is pretty good.


 

发表时间 Sun 26 Mar 17 @ 1:11 pm


(陈旧帖子或论坛版块会自动关闭)