sushifix
Hi,
I need a midi clock signal of the master output for use with lighting. I have read something about a setting of VDJ7 "SendMidiClockTo". Is this deprecated? If not, would this fulfill my requirements and will it be available in near future?
Thanks a lot.
Sascha
I need a midi clock signal of the master output for use with lighting. I have read something about a setting of VDJ7 "SendMidiClockTo". Is this deprecated? If not, would this fulfill my requirements and will it be available in near future?
Thanks a lot.
Sascha
发表时间 Mon 05 Jan 15 @ 7:01 am
groovindj
MIDI clock is available in VDJ 8, although it's not particularly obvious or visible....
Open the config window and select 'controllers'. On the list of controllers (top left) you need to right click on your MIDI interface/output and select 'MIDI Clock Output'.
If you're planning on sending the signal to DMX software then you'll need to use a 'virtual patchbay', and choose that as your output in VDJ, then as your input in the DMX software.
Open the config window and select 'controllers'. On the list of controllers (top left) you need to right click on your MIDI interface/output and select 'MIDI Clock Output'.
If you're planning on sending the signal to DMX software then you'll need to use a 'virtual patchbay', and choose that as your output in VDJ, then as your input in the DMX software.
发表时间 Mon 05 Jan 15 @ 7:07 am
sushifix
okay, very good feature. What I wondering is, that I can select many HW midi devices, but no virtual like http://www.bome.com/products/miditranslator.
Is there any rule when the "MIDI Clock Output" appears and when not? It just not appear in the dropdown menui with all my virtual midi ports (also output)? I verify with other programs, that I can succussful open these virtual ports and also send them MIDI Clock.
In addition does anyone has a good solution to convert midi clock to midi notes? I tried already my friend google but I was not lucky with the results.
Thanks at all.
Sascha
Is there any rule when the "MIDI Clock Output" appears and when not? It just not appear in the dropdown menui with all my virtual midi ports (also output)? I verify with other programs, that I can succussful open these virtual ports and also send them MIDI Clock.
In addition does anyone has a good solution to convert midi clock to midi notes? I tried already my friend google but I was not lucky with the results.
Thanks at all.
Sascha
发表时间 Mon 05 Jan 15 @ 12:26 pm
Adion
If they are output devices they should show up.
LoopBe is working for me, so you may want to give that a try.
LoopBe is working for me, so you may want to give that a try.
发表时间 Mon 05 Jan 15 @ 12:38 pm
groovindj
As far as I know, MIDI Translator is not a virtual router/patchbay.
Try LoopBe instead. http://www.nerds.de/en/loopbe1.html
Try LoopBe instead. http://www.nerds.de/en/loopbe1.html
发表时间 Mon 05 Jan 15 @ 12:45 pm
sushifix
LoopBe works fine, thank you.
Even though the setting to use LoopMIDI as MIDI Clock Output is no saved on VDJ exit. Even if I press save for a custom mapping. I also try to assign a mapping. The mapping was saved in the XML but not the flag for MIDI Clock Output.
Might this be a minor bug?
Even though the setting to use LoopMIDI as MIDI Clock Output is no saved on VDJ exit. Even if I press save for a custom mapping. I also try to assign a mapping. The mapping was saved in the XML but not the flag for MIDI Clock Output.
Might this be a minor bug?
发表时间 Mon 05 Jan 15 @ 1:04 pm
groovindj
I think that was supposed to have been fixed in build 2087. What build are you running?
@Atomix it would be very useful if we could see which build people were currently using under their forum name.
@Atomix it would be very useful if we could see which build people were currently using under their forum name.
发表时间 Mon 05 Jan 15 @ 1:13 pm
sushifix
2117.901
发表时间 Mon 05 Jan 15 @ 1:24 pm
sushifix
Beside saving the settings I found out that the clock is fine as long as you do not touch the pitch slider. If you increase the pitch, clock goes down and if you decrease, clock goes up.
I would expect opposide behaviour.
Could you please check this, too.
Thanks.
I would expect opposide behaviour.
Could you please check this, too.
Thanks.
发表时间 Mon 05 Jan 15 @ 11:15 pm
the SOUND INSURGENT
THIS ^^
The samething here!! At first I thought I was going crazy. It's as if VDJ's clock is sending a backwards signal.........
The samething here!! At first I thought I was going crazy. It's as if VDJ's clock is sending a backwards signal.........
发表时间 Tue 06 Jan 15 @ 7:20 am
groovindj
That deserves a facepalm!
发表时间 Tue 06 Jan 15 @ 8:49 am
sushifix
I am happy that I could help to create such cute girl inside VDJ ;-)
发表时间 Tue 06 Jan 15 @ 8:58 am
the SOUND INSURGENT
Have either of you fellas logged this as a bug yet??
发表时间 Tue 06 Jan 15 @ 10:17 am
sushifix
Is there another specific place to report this or is that in responsibility of VDJ Forum members to catch this up?
发表时间 Tue 06 Jan 15 @ 10:27 am
groovindj
This is the bug report forum! :-)
I don't have access to the bug tracker.
I don't have access to the bug tracker.
发表时间 Tue 06 Jan 15 @ 10:37 am
the SOUND INSURGENT
Well let's hope someone took notice and it'll be fixed in a future build 👍
发表时间 Wed 07 Jan 15 @ 8:20 am
groovindj
Maybe mention it in specific detail in the regression bugs forum (where devs are most likely to see it)....
发表时间 Wed 07 Jan 15 @ 8:32 am
sushifix
This is fixed as well in Build 2126.906.
Perfect!
Thanks a lot.
Sascha
Perfect!
Thanks a lot.
Sascha
发表时间 Thu 15 Jan 15 @ 10:43 am