bambamdill
Hi. I have mapped standard shift button and another one variable on other button ( set "myshift" while_pressed ). The thing is that i want to have 3 actions on one knob. without pressed buttons it should be normal action effect parameter 1. If i press SHIFT i would like to have GAIN function by knob. Third action is with mapped before MYSHIFT while pressed that would control FILTER option. Is it possible to do that?
发表时间 Wed 04 Jan 12 @ 4:00 pm
synthet1c
It's possible to map it in the full version of Pro or during the trial. To do it you would need to map either two shift buttons or use a cycle shift to one button.
just so you know, you can call a shift anything it doesn't need to be called "my_shift" it can be called "gainshift", "filter_shift" "vdj_rules" "anything"... It doesn't matter what you call it as long as you query it on the button/slider/knob/jog you want to shift.
shift 1
set "gain_shift" while_pressed
shift 2
set "filter_shift" while_pressed
knob
var "gain_shift" ? gain_slider : var "filter_shift" ? filter : effect slider 1
or you could use a cycle shift
cycle "vdj_rules" 3
knob
var "vdj_rules" 1 ? gain : var "vdj_rules" 2 ? filter : effect slider 1
If you have pro already you should register your serial so you have access to the bonus downloads.
just so you know, you can call a shift anything it doesn't need to be called "my_shift" it can be called "gainshift", "filter_shift" "vdj_rules" "anything"... It doesn't matter what you call it as long as you query it on the button/slider/knob/jog you want to shift.
shift 1
set "gain_shift" while_pressed
shift 2
set "filter_shift" while_pressed
knob
var "gain_shift" ? gain_slider : var "filter_shift" ? filter : effect slider 1
or you could use a cycle shift
cycle "vdj_rules" 3
knob
var "vdj_rules" 1 ? gain : var "vdj_rules" 2 ? filter : effect slider 1
If you have pro already you should register your serial so you have access to the bonus downloads.
发表时间 Wed 04 Jan 12 @ 8:55 pm
bambamdill
Thanks a lot for your answer. that was exacly what i need. Greetings.
发表时间 Fri 03 Feb 12 @ 4:25 pm
Mikey_With
Is someone able to advise how to set my fx select knob on the MTP to adjust a loop by +/- 5ms when the shift button is active, but still choose effects when it's not?
It's a rotary knob, that 'clicks' as it turns (like a car stereo volume knob), and turns indefinitely.
Ta
Mike
It's a rotary knob, that 'clicks' as it turns (like a car stereo volume knob), and turns indefinitely.
Ta
Mike
发表时间 Sun 30 Jun 13 @ 6:31 am
synthet1c
this should do it... post back if you have any problems
var 'shift' ? param_smaller 0 ? loop_move -5ms : loop_move +5ms : effect select
var 'shift' ? param_smaller 0 ? loop_move -5ms : loop_move +5ms : effect select
发表时间 Sun 30 Jun 13 @ 7:38 am
Mikey_With
Fab. Where do I stick this code?
I've gone into mappers, hit 'Key Learn', press SHIFT, (which defaults to "toggle "shift_loop", then copied and pasted your code above in there instead.
Now what happens is , my shift button is permanently flashing, and when pressed, a list of my effects appears wherever my mouse pointer resides. Furthermore, I am unable to increase or decrease the length of loops (by 1/2, or 2x).
If it makes any difference, I'm using the 'MixTrack Pro:ver 1.1' skin.
Restoring to factory mapper defaults fixes everything again.
Am I being a simpleton, and missing the obvious?
Ta
Mike.
I've gone into mappers, hit 'Key Learn', press SHIFT, (which defaults to "toggle "shift_loop", then copied and pasted your code above in there instead.
Now what happens is , my shift button is permanently flashing, and when pressed, a list of my effects appears wherever my mouse pointer resides. Furthermore, I am unable to increase or decrease the length of loops (by 1/2, or 2x).
If it makes any difference, I'm using the 'MixTrack Pro:ver 1.1' skin.
Restoring to factory mapper defaults fixes everything again.
Am I being a simpleton, and missing the obvious?
Ta
Mike.
发表时间 Mon 01 Jul 13 @ 3:22 pm
synthet1c
you need to map it to the encoder not the shift button, but use this instead as your shift name is different.
var 'shift_loop' ? param_smaller 0 ? loop_move -5ms : loop_move +5ms : effect select
also skins make no difference to your mapping.
var 'shift_loop' ? param_smaller 0 ? loop_move -5ms : loop_move +5ms : effect select
also skins make no difference to your mapping.
发表时间 Mon 01 Jul 13 @ 11:12 pm
Mikey_With
Sorry...
The encoder? Is that the effect select dial?
Ta
Mike
The encoder? Is that the effect select dial?
Ta
Mike
发表时间 Tue 02 Jul 13 @ 12:33 pm
synthet1c
yep
发表时间 Tue 02 Jul 13 @ 10:47 pm
Mikey_With
Works like a charm.
Thank you SO much!
Ta
Mike
Thank you SO much!
Ta
Mike
发表时间 Wed 03 Jul 13 @ 12:56 pm