Braenzu
jaakko wrote :
Is it true that the crossfader cannot be mapped to video xfader??
no, crossfader is original mapped as video_crossfader
Braenzu
发表时间 Sun 15 Aug 10 @ 2:36 pm
cstoll
As stated the crossfader is mapped to the video_crossfader, there is no need to map it to the audio_crossfader for reasons I posted earlier.
Also, any thing that is S_ in the definition means that you need to use the Shift+ to get to it. So S_TouchSlider would be Shift+Touchslider.
Also, any thing that is S_ in the definition means that you need to use the Shift+ to get to it. So S_TouchSlider would be Shift+Touchslider.
发表时间 Sun 15 Aug 10 @ 4:24 pm
djodjo33
@cstoll :
I would like to parameter the touchslider to move in my browser ?
What the action name i can use in the mappeur ?
I tried "Browser_scroll", it's don't work
I tried "param_greater 50% ? browser_scroll + 1 : browser_scroll -1" don't work too...
Can you help me ?
Thanks a lot
PS : Sorry for my poor english...
I would like to parameter the touchslider to move in my browser ?
What the action name i can use in the mappeur ?
I tried "Browser_scroll", it's don't work
I tried "param_greater 50% ? browser_scroll + 1 : browser_scroll -1" don't work too...
Can you help me ?
Thanks a lot
PS : Sorry for my poor english...
发表时间 Sun 15 Aug 10 @ 5:34 pm
cstoll
@djodjo33 - from the bottom of page 6 -
cstoll wrote :
Can't be done because of how the touch sliders work .... this was the first thing that was attempted when trying to do folder and track browsing.
mp3jrick wrote :
Personally Chris, I would have used the touch load pads for just that and use the touch sliders for record case scrolling.
Can't be done because of how the touch sliders work .... this was the first thing that was attempted when trying to do folder and track browsing.
发表时间 Mon 16 Aug 10 @ 12:06 am
RichardMa
Used the VMS4 up against the Ecler Nuo on saturday and it was it's equal in sound quality.
I updated to the new firmware before I went and I had no issue's with the way it operated. All the people I showed it to including the sound engineer were very impressed with everything about the unit.
I still haven't used it in analogue mode yet which will be my next trial in a couple of weeks.
I have to say as well that the way Virtual DJ works with the VMS4 is superb. Again everyone who got to see it were very impressed.
I updated to the new firmware before I went and I had no issue's with the way it operated. All the people I showed it to including the sound engineer were very impressed with everything about the unit.
I still haven't used it in analogue mode yet which will be my next trial in a couple of weeks.
I have to say as well that the way Virtual DJ works with the VMS4 is superb. Again everyone who got to see it were very impressed.
发表时间 Mon 16 Aug 10 @ 3:49 am
groovindj
cstoll wrote :
Can't be done because of how the touch sliders work .... this was the first thing that was attempted when trying to do folder and track browsing.
But the touch sliders work fine with Traktor for this use*, so it would appear to be a VDJ issue rather than the sliders themselves...
* as can be seen in old YouTube videos of VMS4 + Traktor demos.
发表时间 Mon 16 Aug 10 @ 4:16 am
djodjo33
groovindj wrote :
But the touch sliders work fine with Traktor for this use*, so it would appear to be a VDJ issue rather than the sliders themselves...
* as can be seen in old YouTube videos of VMS4 + Traktor demos.
cstoll wrote :
Can't be done because of how the touch sliders work .... this was the first thing that was attempted when trying to do folder and track browsing.
But the touch sliders work fine with Traktor for this use*, so it would appear to be a VDJ issue rather than the sliders themselves...
* as can be seen in old YouTube videos of VMS4 + Traktor demos.
I hope Atomix will find a solution... The slide are very important to navigate in browsers.
发表时间 Mon 16 Aug 10 @ 4:22 am
groovindj
Uh oh!
Now Denon have announced the DN-MC6000....
Very similar to the VMS4 but with a few added bells and whistles.
Now Denon have announced the DN-MC6000....
Very similar to the VMS4 but with a few added bells and whistles.
发表时间 Mon 16 Aug 10 @ 5:02 am
djodjo33
groovindj wrote :
Uh oh!
Now Denon have announced the DN-MC6000....
Very similar to the VMS4 but with a few added bells and whistles.
Now Denon have announced the DN-MC6000....
Very similar to the VMS4 but with a few added bells and whistles.
Cool !
发表时间 Mon 16 Aug 10 @ 6:50 am
GadgetMan
It was bound to happen and I'm guessing some of the issues us early adopters are facing are because ADJ wanted to be first to market (just an opinion of course), however first to market does not always mean best.
It will be interesting to see if you guys in the US get to see this at the forthcoming Expo. If so, report back - but not here as this is the VMS4 thread!
Roy
It will be interesting to see if you guys in the US get to see this at the forthcoming Expo. If so, report back - but not here as this is the VMS4 thread!
Roy
发表时间 Mon 16 Aug 10 @ 6:51 am
GadgetMan
@GroovinDJ, I see you've accepted the personal touch from AA. I'm getting that too should be towards the end of this week.
Whereabouts are you? If you're close enough it may maye sense to come together on this.
Cheers,
Roy
Whereabouts are you? If you're close enough it may maye sense to come together on this.
Cheers,
Roy
发表时间 Mon 16 Aug 10 @ 7:07 am
groovindj
I've not heard from Simon Fletcher yet.
I'm in the south, near London.
I'm in the south, near London.
发表时间 Mon 16 Aug 10 @ 7:20 am
GadgetMan
I'm North Essex - Clacton. Whereabouts in London are you? Are you free later this week?
The plan is to set up in the club and try the VMS4 out against my old Q-SD mixer and the clubs DJM-600.
Cheers,
Roy
The plan is to set up in the club and try the VMS4 out against my old Q-SD mixer and the clubs DJM-600.
Cheers,
Roy
发表时间 Mon 16 Aug 10 @ 7:24 am
groovindj
I'm not in London, I'm near London! :-)
Where's the club?
Where's the club?
发表时间 Mon 16 Aug 10 @ 8:40 am
GadgetMan
On Clacton Pier!
发表时间 Mon 16 Aug 10 @ 9:24 am
groovindj
111 miles away - no, I think I'd rather have them come to me...
:D
:D
发表时间 Mon 16 Aug 10 @ 10:07 am
GadgetMan
lol... yeah sounds like a better option and as Simon has to drive from even further south, chances are he''l get to you first ;-)
Cheers,
Roy
Cheers,
Roy
发表时间 Mon 16 Aug 10 @ 10:17 am
cstoll
groovindj wrote :
But the touch sliders work fine with Traktor for this use*, so it would appear to be a VDJ issue rather than the sliders themselves...
* as can be seen in old YouTube videos of VMS4 + Traktor demos.
cstoll wrote :
Can't be done because of how the touch sliders work .... this was the first thing that was attempted when trying to do folder and track browsing.
But the touch sliders work fine with Traktor for this use*, so it would appear to be a VDJ issue rather than the sliders themselves...
* as can be seen in old YouTube videos of VMS4 + Traktor demos.
And what you don't understand is that the 'guts' of the unit are nothing to what is in that OLD - pointless - video. You can not compare a what was and what never happened - to a what is ...
You are a pro user - if you can make it work - you have all the tools to your disposal in the VDJScript - give it a try.
Chris
Hardware Development
VirtualDJ/Atomix Productions
发表时间 Mon 16 Aug 10 @ 12:37 pm
groovindj
So the spec changed? They downgraded it?
How are we supposed to know that? We see the original videos, we buy the product, we expect it to do what was shown.
Why shouldn't we?
How are we supposed to know that? We see the original videos, we buy the product, we expect it to do what was shown.
Why shouldn't we?
发表时间 Mon 16 Aug 10 @ 1:39 pm
cstoll
groovindj wrote :
we expect it to do what was shown.
Why shouldn't we?
Why shouldn't we?
Because it's not the same software.
发表时间 Mon 16 Aug 10 @ 2:24 pm
