Hardware Manuals


Mixars - DUO MKII

Front - Rear Panels


FRONT PANEL





  1. MIC Input: Connect a mic on the DUO MKII. You can use XLR or Jack (TRS) connectors.

  2. AUX Input: Connect an auxiliary device.

  3. MIC/AUX switch: Select whether MIC or AUX input should be send to DUO MKII Master Output. When the switcher is im middle position (OFF) none of the two inputs is send on Master Output.

  4. Ch1 Fader Curve: Adjust the fader curve for channel 1 (hardware operation)

  5. Ch1 Reverse Fader: Reverse the direction of fader for channel 1 (hardware operation)

  6. CF Cut In: Adjust the crossfader cut-in point (hardware operation)

  7. CF Reverse: Reverse the direction of the crossfader (hardware operation)

  8. CF Curve: Adjust the curve of the crossfader (hardware operation)

  9. Ch2 Reverse Fader: Reverse the direction of fader for channel 2 (hardware operation)

  10. Ch2 Fader Curve: Adjust the fader curve for channel 2 (hardware operation)

  11. HEADPHONES CONNECTOR: Connect your headphones. Both sizes (3.5mm and 6.35mm ( 1⁄4 in)) are offered.

  12. SPLIT CUE: Split the sound of Headphones and Master channel to the left and right side of your headphones. (Hardware operation)

REAR PANEL