Switch to Computer mode
When the SC6000M is powered on, it will be set to Standalone/Engine mode. To switch to Computer mode and control VirtualDJ you need to ...
- press on the Computer icon at the SC6000M screen
- or hold down for a second the VIEW button at the center-top panel of the device, select SOURCE, then pres on the Computer icon.
Firmware & Drivers
Firmware (both Windows and Mac) : Update the firmware of the unit to the latest available version from https://www.denondj.com/downloads
Drivers : No driver is necessary to be installed on both Windows and Mac OSX computers.
Note For SC6000M Screen to work on Mac computers, the following OS are supported....
- 11.x (running in Rosetta if M1 Chip)
VirtualDJ 8 Setup
Once VirtualDJ is opened, a Login Window will appear. Login with your virtualdj.com account’s credentials.
A Pro Infinity or a Pro Subscription License is required to use the Denon DJ SC6000M . Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.
Click to OK
The unit is now ready to operate.
Note : The SC6000M doesn't offer a USB Audio Interface (sound card). See Audio Setup Options in VirtualDJ Manual
For further software settings please refer to the User Guide of VirtualDJ 8.