Akiyama - Ttwo

CONTROLS

KEY

ACTION

SHIFT (SECONDARY) ACTION

S SHIFT

Press this button down to access secondary actions as described in the SHIFT ACTION column

1 SYNC

Sync Tempo and Phase with the Master Deck

Set deck as Master Deck

2 CUE

Set temporary Cue point or return to Cue and preview while pressed

Enables/disables Smart Cue

3 PLAY

Play/Pause track

Enables/disables Smart Play

4 SCRATCH

Sets Jog to Scratch (Vinyl) mode when enabled or CD (Bend) mode when disabled
Hold for more than 2 seconds to enable/disable Smart Loop

Enables/disables Master Tempo (Keylock). When enabled, the key of the track will remain intact when Tempo is changed

5 JOG

Touch-sensitive platter for scratch or bend, depending on the Vinyl mode
When Loop In Adjust mode is enabled, use the Jogwheel to fine-adjust the Loop In (Start) point of a manual loop
When Loop Out Adjust mode is enabled, use the Jogwheel to fine-adjust the Loop In (Start) point of a manual loop

Fast search (seek) through track's time

6 DECK C/D

Assign left/right side of controller to Decks 1/2 or 3/4 respectively

7 LOOP /2

Halves the size of the Loop

When loop is enabled, moves the loop backwards in time by the amount of beats equal to the size of the triggered loop

8 LOOP IN

Sets the current track's position as Loop In (Start) point of a manual loop

When loop is enabled, sets the Jogwheel to Loop In Adjust mode.(LED will blink)

8 LOOP OUT

Sets the current track's position as Loop Out (End) point of a manual loop. Use the same button again to exit the Loop

When loop is enabled, sets the Jogwheel to Loop Out Adjust mode.(LED will blink)

10 LOOP X2

Doubles the size of the Loop

When loop is enabled, moves the loop forward in time by the amount of beats equal to the size of the triggered loop

11 PITCH

Adjust track's tempo

12 PITCHBEND -

Temporary slow-down track's tempo while button is pressed. When released, tempo will return to the value designated by the Pitch fader.

Links all Tempo faders from all decks so that they all move together

13 PITCHBEND +

Temporary speed-up track's tempo while button is pressed. When released, tempo will return to the value designated by the Pitch fader.

Smoothly reset Tempo to the original value (zero/middle)

14 HOTCUE 1

Assigns or triggers (if assigned) Hotcue 1

Deletes Hotcue 1

15 HOTCUE 2

Assigns or triggers (if assigned) Hotcue 2

Deletes Hotcue 2

16 HOTCUE 3

Assigns or triggers (if assigned) Hotcue 3

Deletes Hotcue 3

17 HOTCUE 4

Assigns or triggers (if assigned) Hotcue 4

Deletes Hotcue 4

18 FX/SAMPLE

Sets the top 3 FX/SP knobs to either FX (when disabled) or Sampler mode (when enabled)

19 P1/V

In FX mode : Adjusts the 1st Parameter of the selected Effect
In Sampler mode : Adjusts the Volume of the selected Sample
In Video mode : Left knob adjusts the 1st Parameter of the selected Video Transition (if available)
Right knob adjusts the 1st Parameter of the selected Master Video Effect (if available)

20 P2

In FX mode : Adjusts the 2nd Parameter of the selected Effect
In Sampler mode : no function
In Video mode : Left knob adjusts the 2nd Parameter of the selected Video Transition (if available)
Right knob adjusts the 2nd Parameter of the selected Master Video Effect (if available)

21 FX/SP

In FX mode : Select the previous/next available Effect
In Sampler mode : Selects the next/previous Sample from the selected Sampler Bank
In Video mode : Left knob selects the previous/next available Video Transition
Right knob selects the previous/next Master Video Effect

Push for more than 2 seconds to enable/disable Video mode
In FX mode : Push to enable/disable the selected Effect
In Sampler mode : Push to trigger the selected Sample
In Video mode : Push left knob to trigger the selected Video Transition and the right knob to trigger the selected Master Video Effect

In Sampler mode : Half/double the Loop of the selected Sample

In Sampler mode : Push to record deck to a new Sample

22 CROSSFADER

Blends audio signals between the left and right assigned decks

23 VOLUME

Adjust the Volume of the Left/Right assigned Deck

24 PFL

Sends the audio signal of the Left/Right assigned Deck to the Headphones channel (for pre-listening)

25 FILTER

Applies a High/Low-Pass Filter to the Left/Right assigned Deck

Adjusts the Key of the track loaded to the Left/Right assigned Deck

26 EQ LOW

Adjusts the Low (Bass) Equalizer Band of the Left/Right assigned Deck

27 EQ MID

Adjusts the Middle Equalizer Band of the Left/Right assigned Deck

28 EQ HI

Adjusts the High (Treble) Equalizer Band of the Left/Right assigned Deck

29GAIN

Adjusts pre-fader output level of the Left/Right assigned Deck

30MASTER

Adjusts the level of the Master Output Channel

31HP LEVEL

Adjusts the level of the Headphones Output Channel

32HP MIX

Blends audio signal between the Master Output (when in maximum position) and the Decks that have been selected via the PFL buttons (when in minimum position).

33BROWSE

Scrolls through tracks or folders

When focus is on Folders List, push to set focus to the Songs List (if the folder contains any tracks) or to the next (sub)folder (if the folder doesnt have any tracks)

Scrolls through Folders

If focus is on the Folders list, push to open/close sub-folders
If focus is on the Songs List, push to add the selected track to the Automix List of Sideview

34 LOAD

Load the selected track from the Browser to the Left/Right assigned Deck
Hold for more than 2 seconds to unload the same Deck

In Video mode :
Left LOAD button: Move Video Crossfader to the Left side. Hold for more than 2 seconds to enable/disable Auto Video Crossfader.
Right LOAD button : Move Video Crossfader to the Right side. Hold for more than 2 seconds to enable/disable Link Video Crossfader

Front & Rear