DJ Vinny
Just hooked up my GIGAPORT to Virtual DJ 4.? for the first time... I had used it on 3.4 with no problems but now I am getting static in the audio. Keep in mind this static will occur even if I am not connected to the soundsystem. I hooked up headphones to the gigaport and got it also....
Any ideas/suggestions? Is there a setting I a missing?
Thanks,
Vin.
Any ideas/suggestions? Is there a setting I a missing?
Thanks,
Vin.
发表时间 Sun 10 Dec 06 @ 2:31 pm
sbangs
best check the grounding of ur cables mate
sounds like ur getting interfearance
sounds like ur getting interfearance
发表时间 Sun 10 Dec 06 @ 3:23 pm
DJ Vinny
If I am just working off my laptop at home... Nothing else connected...and use the gigaport I am getting static... Unless the power in my house is suddenly not grounded, what else could it be?
发表时间 Mon 11 Dec 06 @ 2:19 am
sbangs
does your laptop have 2 or 3 prongs on the charger?
发表时间 Mon 11 Dec 06 @ 6:41 pm
erniejade
I jave the same problem on my gigaport. I changed to a echo DJ card and no more problem
i have the usb gigaport. actually most usb sound cards i was having this issue or using a usb sound card or using a usb and internal sound card for the headphone
i got fed up completely changed cards.
i have the usb gigaport. actually most usb sound cards i was having this issue or using a usb sound card or using a usb and internal sound card for the headphone
i got fed up completely changed cards.
发表时间 Tue 12 Dec 06 @ 5:26 am
Supacon
Odd... for me it was the other way around.
I have a computer with a Delta 410 PCI card from M-Audio, and I am using a Gigaport AG now and the sound is much cleaner. The 410 worked great for 3.4, and when I upgraded to v4, it was very crackly... the Gigaport AG doesn't impress me much, but no crackles at least!
I have a computer with a Delta 410 PCI card from M-Audio, and I am using a Gigaport AG now and the sound is much cleaner. The 410 worked great for 3.4, and when I upgraded to v4, it was very crackly... the Gigaport AG doesn't impress me much, but no crackles at least!
发表时间 Fri 15 Dec 06 @ 8:32 am
TopHouse
If you are getting hiss or static in a USB soundcard, try this:-
Take a piece of wire and at one end crimp on a small loop terminal tag. Unscrew one of the case screws from your PC and attached the loop to your PC case with it. On the other end, solder it to the ground (outside) terminal of an RCA/Phono plug, plug this into eiter A) a spare socket on your gigaport or B) try it in different spare inputs on your external mixer OR the earth terminals on external mixer.
The above CAN work as it's what i need to do with mine to eliminate background noise.
Take a piece of wire and at one end crimp on a small loop terminal tag. Unscrew one of the case screws from your PC and attached the loop to your PC case with it. On the other end, solder it to the ground (outside) terminal of an RCA/Phono plug, plug this into eiter A) a spare socket on your gigaport or B) try it in different spare inputs on your external mixer OR the earth terminals on external mixer.
The above CAN work as it's what i need to do with mine to eliminate background noise.
发表时间 Sun 17 Dec 06 @ 8:04 pm
DJ Vinny
I appreciate all the suggestions but I think we are getting off topic here. The GIGAPORT sound card worked perfect with 3.4 and now I have static with 4.2.. Did something change on the software or config side?
Vin
Vin
发表时间 Mon 18 Dec 06 @ 8:49 pm