vinylburns
Hi
Using the sampler, the volume level of the samples regularly resets to almost zero.
When this happens, it affects all the samples in the bank.
It may only be affecting banks that I've created myself, or edited... I haven't noticed the issue with other banks (but I'm mainly working with edited banks)
Any ideas what might be causing this?
Using the sampler, the volume level of the samples regularly resets to almost zero.
When this happens, it affects all the samples in the bank.
It may only be affecting banks that I've created myself, or edited... I haven't noticed the issue with other banks (but I'm mainly working with edited banks)
Any ideas what might be causing this?
发表时间 Tue 29 Oct 19 @ 3:08 am
groovindj
Is it random, or after you’ve switched banks? This is one of the “features” of VDJ 8.
发表时间 Tue 29 Oct 19 @ 12:44 pm
PeteVanPolaris
Can confirm there is a problem with sample volume, at least for custom samples. In my case though, the volume increases and seem to be somewhat random or some form of "build up". Did not change bank in between (in this case a ID sample played on top of a mix). VDJ 2020/64-bit/Win10.
Just a guess: maybe the internal byte buffer for the sample is changed instead of keeping the resulting data after applying the sample's gain once, or put differently: the sample's gain is applied several times (in some situations) and depending on its setting (+/- value) the sample increase/decrease volume as a result? This could also explain why some samples are unaffected if the gain is "0" (no change).
Just a guess: maybe the internal byte buffer for the sample is changed instead of keeping the resulting data after applying the sample's gain once, or put differently: the sample's gain is applied several times (in some situations) and depending on its setting (+/- value) the sample increase/decrease volume as a result? This could also explain why some samples are unaffected if the gain is "0" (no change).
发表时间 Tue 29 Oct 19 @ 1:45 pm
vinylburns
groovindj wrote :
Is it random, or after you’ve switched banks? This is one of the “features” of VDJ 8.
Both... It often happens while working solely within one bank.
I'll set the volume levels, start playing the samples, and sometimes within just seconds, they'll be back to 5% or so.
发表时间 Tue 29 Oct 19 @ 10:10 pm
Rune (DJ-In-Norway)
Using a controller with touch sensitive pads? That are mapped to control volume of sample by press strength
发表时间 Wed 30 Oct 19 @ 1:03 am
vinylburns
Rune (dj-in-norway) wrote :
Using a controller with touch sensitive pads? That are mapped to control volume of sample by press strength
Using a controller with touch sensitive pads? That are mapped to control volume of sample by press strength
hmmm that would make sense, but as far as I'm aware my VCI-400 doesn't have touch sensitive pads...
发表时间 Thu 31 Oct 19 @ 7:16 am
vinylburns
Rune (dj-in-norway) wrote :
Using a controller with touch sensitive pads? That are mapped to control volume of sample by press strength
Using a controller with touch sensitive pads? That are mapped to control volume of sample by press strength
Ah... Not on the VCI-400 but it looks like the Ableton Push which is also connected, might be the source of the problem... Problem solved, for now :-\
Thanks.
发表时间 Thu 31 Oct 19 @ 8:24 am