Forum: VirtualDJ Technical Support
(NOTE: VirtualDJ continuously updated, so many older topic on this forum are most probably already fixed in the current build)
If you need extended support, contact our Support Team.
Forum Guidelines (*) The moderators hold the rights to move or modify posts in order to keep the discussions clear or to facilitate the search.
Numark Orbit To...
话题: Numark Orbit To Control Lighting
My current action is " param_multiply 255 & param_cast 'integer' & set '$fsvalue' value & set '$fscommand' 155 "
In the Devices XML, the code is <button cc="0x02" value="0x01" name="K1" channel="15" /> for the jog wheel.
What would I need to change to get it to stop at 100%
发表时间 Mon 20 Jun 16 @ 7:32 am
But why do you use <button> and not <slider> or <encoder> ?
So for a <slider> (absolute position), it should be ..
<slider cc="0x02" name="" channel=""/>
and for the encoder (relative position ) it should be ..
<encoder cc="0x02" name="" channel=""/> (you may need to define zero="" too)
You could still add a <button> as well and maybe split the action to 2 parts, one with the actions you need to send its velocity and another one for the button when you need to send a specific value when the "Jog provides a specific value.
This is how the Jog (in K2 mode) is defined in the native definition..
<slider cc="0x02" name="WHEEL_K2_BANK1_ABS" ghost="no" channel="0" />
<jog cc="0x02" full="52" name="WHEEL_K2_BANK1_JOG" channel="0" />
<encoder cc="0x02" name="WHEEL_K2_BANK1_REL" channel="0" />
You can skip the <jog>, you wont need it.
发表时间 Mon 20 Jun 16 @ 11:57 am
My knowledge on coding is very limited. could you give me an example to try?
On another topic related to the freestyler dmx plugin. would it be possible to get the orbit or another midi device to get the status of what cuelist button etc from freestyler and report it to the controller?
发表时间 Tue 21 Jun 16 @ 11:06 am