sbangs
dear all 4.2 r1 has been released
r1 fixes a problem some people where still having with a second souncard
thanks to the dev team :)!
for this release
happy holidays all :)
r1 fixes a problem some people where still having with a second souncard
thanks to the dev team :)!
for this release
happy holidays all :)
发表时间 Mon 25 Dec 06 @ 3:17 pm
dj t boogie
that was the fastest re-up to an update ever!!!lol
发表时间 Mon 25 Dec 06 @ 3:23 pm
van erum
I will try it tonight on my windows pc.
Nice present!;)
Merry Christmas everyone!!
Nice present!;)
Merry Christmas everyone!!
发表时间 Mon 25 Dec 06 @ 4:19 pm
ConQuest
I bet 4.2 r2 will be out before I'm done typing this post...
发表时间 Mon 25 Dec 06 @ 4:34 pm
dj t boogie
ConQuest wrote :
I bet 4.2 r2 will be out before I'm done typing this post...
hehe with better id3/play list config. lol j/k
发表时间 Mon 25 Dec 06 @ 5:19 pm
ConQuest
dj t boogie wrote :
hehe with better id3/play list config. lol j/k
ConQuest wrote :
I bet 4.2 r2 will be out before I'm done typing this post...
hehe with better id3/play list config. lol j/k
lol j/k?
No seriously Atomix, we need this! =)
Maybe it won't make it in 4.2 r2, but probably in 4.2 r3 that will be out in 37 minutes.
发表时间 Mon 25 Dec 06 @ 5:35 pm
sbangs
fine hyjack my goodwill and joy to all thread why dont u ;)
发表时间 Mon 25 Dec 06 @ 5:37 pm
stepaerobx
Was disappointed when I installed 4.2 and tested the second soundcard issue but after installing 4.2r1 - it works great!!!!! Thanks so much for the soundcard fix and doing all this on Christmas - there is a Virtual DJ Santa after all :)
DJFingerz
DJFingerz
发表时间 Mon 25 Dec 06 @ 5:37 pm
ConQuest
skyfxl wrote :
fine hyjack my goodwill and joy to all thread why dont u ;)
Ah... the gift of taking is mo' better than the gift of giving. =)
Nothing says "HAPPY HOLIDAYS" better than a good, old fashioned, thread hijacking! =P
发表时间 Mon 25 Dec 06 @ 5:40 pm
djbigga
Is it only the dual soundcard issue that has changed in this update?
发表时间 Mon 25 Dec 06 @ 6:41 pm
Mantahoe
Where's the list that shows what's been fixed? If there isn't could someone please tell me what the changes are?
发表时间 Mon 25 Dec 06 @ 6:41 pm
cstoll
发表时间 Mon 25 Dec 06 @ 6:42 pm
sbangs
djbigga wrote :
Is it only the dual soundcard issue that has changed in this update?
many has changed since 4.1 to 4.2
read more here
http://www.virtualdj.com/products/virtualdj/history.html
R1 however just adds the dual card
发表时间 Mon 25 Dec 06 @ 6:42 pm
Dj Xeo
had a bit of a play after christmas lunch and i love it, the tracking is MUCH better when backspinning and there is no POP as it corrects its missalignment! well done virtual DJ
couple of problems tho, when using smart mode on the worn/ dirty side of my timecode it sometimes jumps to a random part of the song as if i had needle dropped or something, it did that about 3 times in a 1 hr set.
also for some reason when the timecode runs out it doesn go to internal mode like it used to and carry on playing, now it just keeps going until it runs rite off the end of the reccord and the music stops dead?!!?!
that last one happens on both sides of the disk
i usualy use reletive mode but the 'auto tc bypass when at 11:30 of the 12mins mode' thing not working pretty much sucks
but all in all a good update
couple of problems tho, when using smart mode on the worn/ dirty side of my timecode it sometimes jumps to a random part of the song as if i had needle dropped or something, it did that about 3 times in a 1 hr set.
also for some reason when the timecode runs out it doesn go to internal mode like it used to and carry on playing, now it just keeps going until it runs rite off the end of the reccord and the music stops dead?!!?!
that last one happens on both sides of the disk
i usualy use reletive mode but the 'auto tc bypass when at 11:30 of the 12mins mode' thing not working pretty much sucks
but all in all a good update
发表时间 Mon 25 Dec 06 @ 7:08 pm
sbangs
Dj Xeo wrote :
couple of problems tho, when using smart mode on the worn/ dirty side of my timecode it sometimes jumps to a random part of the song as if i had needle dropped or something, it did that about 3 times in a 1 hr set.
couple of problems tho, when using smart mode on the worn/ dirty side of my timecode it sometimes jumps to a random part of the song as if i had needle dropped or something, it did that about 3 times in a 1 hr set.
use a vinyl cleaning kit
the needle will jump when it comes into contact with dirt or dust
this is the same for all vinyls which jump
发表时间 Mon 25 Dec 06 @ 7:10 pm
wessmith
and when the record runs out the song runs out, thatts jus like a real vinyl;...... wouldnt u want to bethat way????? i would, or just dont let the needle run out off the end.
发表时间 Mon 25 Dec 06 @ 9:35 pm
Dj Xeo
the two of you make me laugh sometimes lol, enthusiastic tho
it didnt use to run out before, why now? its not like its a bonus feature to mess up your set is it? im sure there is going to be an option to turn this back on somewhere because the way it was before was great. having vinyl with particles of dust on is not going to make the needle jump halfway across the vinyl and needle drop itself there.
the concern i have is that my dirty timecodes are tricking VDJ into thinking that it has been needledroped somewhere else by missreading a timestamp, but then shouldnt it jump rite back as soon as it reads the next timecode properly? the signal meter in the settings is allways around 100 even tho they arent nice and shiny deep black like the other sides
it didnt use to run out before, why now? its not like its a bonus feature to mess up your set is it? im sure there is going to be an option to turn this back on somewhere because the way it was before was great. having vinyl with particles of dust on is not going to make the needle jump halfway across the vinyl and needle drop itself there.
the concern i have is that my dirty timecodes are tricking VDJ into thinking that it has been needledroped somewhere else by missreading a timestamp, but then shouldnt it jump rite back as soon as it reads the next timecode properly? the signal meter in the settings is allways around 100 even tho they arent nice and shiny deep black like the other sides
发表时间 Mon 25 Dec 06 @ 10:56 pm
sbangs
Dj Xeo wrote :
the two of you make me laugh sometimes lol, enthusiastic tho
it didnt use to run out before, why now? its not like its a bonus feature to mess up your set is it? im sure there is going to be an option to turn this back on somewhere because the way it was before was great. having vinyl with particles of dust on is not going to make the needle jump halfway across the vinyl and needle drop itself there.
the concern i have is that my dirty timecodes are tricking VDJ into thinking that it has been needledroped somewhere else by missreading a timestamp, but then shouldnt it jump rite back as soon as it reads the next timecode properly? the signal meter in the settings is allways around 100 even tho they arent nice and shiny deep black like the other sides
it didnt use to run out before, why now? its not like its a bonus feature to mess up your set is it? im sure there is going to be an option to turn this back on somewhere because the way it was before was great. having vinyl with particles of dust on is not going to make the needle jump halfway across the vinyl and needle drop itself there.
the concern i have is that my dirty timecodes are tricking VDJ into thinking that it has been needledroped somewhere else by missreading a timestamp, but then shouldnt it jump rite back as soon as it reads the next timecode properly? the signal meter in the settings is allways around 100 even tho they arent nice and shiny deep black like the other sides
well u know i do my best;)
here in rain, sleet or snow
发表时间 Mon 25 Dec 06 @ 11:00 pm
DJ Johnny G
Just had to post up that I have this new update installed.
Its working amaizing. No more sound crackling!!! Thanks again VDJ crew.
John
Its working amaizing. No more sound crackling!!! Thanks again VDJ crew.
John
发表时间 Tue 26 Dec 06 @ 5:17 am
wessmith
hey dj xeo, when u said the 2 of u make me laugh sometimes,who r the 2 of us????? skyfxl and me??????
发表时间 Tue 26 Dec 06 @ 5:44 am
