VirtualDJ - Reset Stems and Unmute Stems within one action

PRO InfinityMember since 2011

Hi, this is Sven from germany and i have a question / problem with VDJScript (using Build 5949 on Win10).

I wrote an action for a Button which is working, but the syntax looks horrible. So i'm looking for a better approach.

What do i wanna do in general?

With one Button on a controller i'd like to

1. reset the eq
2. set the 'filter' to 50%
3. reset all 5 stems back to 50%
4. unmute a stem if it is muted

The action for the first three Commands is easy and working fine:

action="eq_reset & filter 50% & stem 'Vocal' 50% & stem 'Instru' 50% & stem 'Bass' 50% & stem 'Kick' 50% & stem 'HiHat' 50%"

But now Command 4: We have 5 StemCommands to check ( mute_stem 'Vocal', mute_stem 'Instru' and so on) with a possible state "on" and "off" -> so there are 32 Combinations at all to check.

My problem is that the following abstract command doesn't work because as soon as i use the ? Operator for the first time to check a state - the '&' Operator now works only in one of the two expressions from the '?'-switch and not in the "higher" level anymore:

The command what i need is written in abstract form like this:

action = "ResetEQ" AND
"Reset Filter" AND
"Reset5 Stems" AND
"if stem 'Vocal' is muted ? unmute it else do nothing" AND // (4A)
"if stem 'Instru' is muted ? unmute it else do nothing" AND // (4B)
"if stem 'Bass' is muted ? unmute it else do nothing" AND
"if stem 'Kick' is muted ? unmute it else do nothing" AND
"if stem 'HiHat' is muted ? unmute it else do nothing" AND

when i write examplary the Parts 4A and 4B it in that way:

"mute_stem 'Vocal' ? mute_stem 'Vocal' : nothing & mute_stem 'Instru' ? mute_stem 'Instru' : nothing" it doesn't work because the "&" Operator is not interpreted like the "AND" instruction from the abstract command above. It is interpreted as "and" in the 2.Expression from the first "?" operation.

So the only way for me was to program out all 32 possible paths of the 5 mute_stem commands :

eq_reset & filter 50% & stem 'Vocal' 50% & stem 'Instru' 50% & stem 'Bass' 50% & stem 'Kick' 50% & stem 'HiHat' 50% & mute_stem 'Vocal' ? mute_stem 'Instru' ? mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' : mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Kick' & mute_stem 'HiHt' : mute_stem 'Vocal' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'HiHat' : mute_stem 'Vocal' : mute_stem 'Instru' ? mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Instru' & mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Instru' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'HiHat' : mute_stem 'Instru' : mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHt' ? mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'HiHat' : nothing

Wow is that a cumbersome command.

-> Much easier would it be, when there would be in a reset command for all stems (which resets all stems back to 50% AND unmutes a stem if it is muted) analogous to the 'eq_reset' command (which resets all eq_bands AND ALSO resets a 'eq_kill' if it was set -> perfect!). Where can i make such an suggestion - where is the right place for it?

So my final question: Is there an easier syntax to program the abstract command above in VDJ (without programming out all 32 decision-paths)?

Thanks for helping me.

发表时间 Fri 26 Jun 20 @ 10:15 am

PachN

PRO InfinityMember since 2009

Just a hint. Use the [ code ] Tag if you are posting a script.
It makes reading the code much easier.


eq_reset & filter 50% & stem 'Vocal' 50% & stem 'Instru' 50% & stem 'Bass' 50% & stem 'Kick' 50% & stem 'HiHat' 50% & mute_stem 'Vocal' ? mute_stem 'Instru' ? mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Instru' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Instru' : mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Vocal' & mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'Kick' & mute_stem 'HiHt' : mute_stem 'Vocal' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Vocal' & mute_stem 'HiHat' : mute_stem 'Vocal' : mute_stem 'Instru' ? mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Instru' & mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Instru' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Instru' & mute_stem 'HiHat' : mute_stem 'Instru' : mute_stem 'Bass' ? mute_stem 'Kick' ? mute_stem 'HiHt' ? mute_stem 'Bass' & mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Bass' & mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'Bass' & mute_stem 'HiHat' : mute_stem 'Bass' : mute_stem 'Kick' ? mute_stem 'HiHat' ? mute_stem 'Kick' & mute_stem 'HiHat' : mute_stem 'Kick' : mute_stem 'HiHat' ? mute_stem 'HiHat' : nothing

EDIT: okay, IF the format is better. Maybe its copy&paste problem and not preserving new lines

发表时间 Fri 26 Jun 20 @ 10:33 am

Dan (djtouchdan) Country: GB

PRO InfinityModeratorMember since 2008

In a forthcoming update eq_reset will do all of this (except filter).

So you will be able to do:

eq_reset & filter 50%

As always no ETA, but soon ;)

发表时间 Fri 26 Jun 20 @ 10:47 am

groovindj

PRO InfinityMember since 2007

So rather than just resetting the normal EQ, this will reset the stems EQ as well?

What about if the user only wants to reset standard EQ, not stems (or vice versa)? Shouldn't there be a stem_reset as a separate thing?

发表时间 Fri 26 Jun 20 @ 11:00 am

SvenVirtual Country: DE

PRO InfinityMember since 2011

Dan (djtouchdan) wrote :

In a forthcoming update eq_reset will do all of this (except filter).

So you will be able to do:

eq_reset & filter 50%

As always no ETA, but soon ;)

Thanks! That sounds good! So I'm waiting for it. :)

But in general - is there an easier way to program out commands and multiple decisions? Or do i always have to program out all paths seperatlely like i showed it in the initial-Post??

In Abstract way:

action =

instruction1

AND
(
if ConditionA Do instruction2 else instruction 3
)
AND
(
if ConditionA Do instruction2 else instruction 3
) ...

What is here the best syntax?

发表时间 Fri 26 Jun 20 @ 11:55 am

Nicotux

Home userMember since 2014

"quote=groovindj]
So rather than just resetting the normal EQ, this will reset the stems EQ as well?

What about if the user only wants to reset standard EQ, not stems (or vice versa)? Shouldn't there be a stem_reset as a separate thing?
[/quote"

That's true
and what will be the action of setting resetEqOnLoad ?? Shouldn't there be a resetStemOnLoad as a separate thing either?

发表时间 Fri 26 Jun 20 @ 1:00 pm

dfyffe

PRO InfinityMember since 2003

Is there a solo or unsolo or reset stem command ? Im trying this ( deck left stem "FullVocal" & deck left stem FullMelo & deck left stem FullRhythm) to unmute but its not working, what am i missing ?.

发表时间 Fri 26 Mar 21 @ 1:05 pm

Rune (DJ-In-Norway) Country: NO

PRO Infinity Member since 2004

dfyffe wrote :

Is there a solo or unsolo stem command

only_stem 'vocal'
only_stem 'melody'

发表时间 Fri 26 Mar 21 @ 3:17 pm

iamkaislate Country: US

Home userMember since 2020

Does eq_reset reset all stems now? It doesn't seem to be the case yet...
Or has there since been a btter command to reset everything including stems?
Just looking for an update regarding this issue.

发表时间 Tue 14 Dec 21 @ 9:53 pm

djdad

PRO InfinityDevelopment ManagerMember since 2005

eq_reset will indeed work and reset the EQ, but it wont reset Stems if you have chosen Classic Eq (No Stems) and try to apply Stems from other buttons or faders (e.g the Stems Pads page)

发表时间 Tue 14 Dec 21 @ 11:32 pm

ghenadie

Home userMember since 2006

Thank you very much, SVENVIRTUAL, for this subject. It helps me, without including equalizer, to reset in one click the stems pads. Very useful.

发表时间 Mon 02 Oct 23 @ 9:57 am

Forum: General Discussion