chemtastic
hello. im new here. my problem is. i want to know how to use the headphones as a cue and my computer speakers as my main output.
i use controller from pionner dj wego2 and just updated the new firmware and software for this controller.
i have tried all from the previous topic but nothing changed
the best i can get was my headphones produce the sound like computer speakers but got some distort/noise in the headphones.
someone please help me. im new here :(
i use controller from pionner dj wego2 and just updated the new firmware and software for this controller.
i have tried all from the previous topic but nothing changed
the best i can get was my headphones produce the sound like computer speakers but got some distort/noise in the headphones.
someone please help me. im new here :(
发表时间 Mon 31 Mar 14 @ 10:59 am
chemtastic
ok. now the problem that i faced (no headphones cue) is settled. but another problem is the sound from the headphones got a lil bit distort like a annoying sound. may i know why?
发表时间 Tue 01 Apr 14 @ 11:01 am
groovindj
You may need to adjust buffer size of the WeGO ASIO driver.
发表时间 Tue 01 Apr 14 @ 11:19 am
chemtastic
thanks but how to adjust the buffer sound on the wego2?
发表时间 Tue 01 Apr 14 @ 12:28 pm
chemtastic
groovindj wrote :
You may need to adjust buffer size of the WeGO ASIO driver.
ok now i know where the settings. but i tried to reduce and increase the buffer but the output is still the same.. :(
发表时间 Tue 01 Apr 14 @ 12:35 pm
djdad
So, the distortion comes only from Headphones ? No distortion on the Master Output ?
That seems to be a hardware issue then (either your Headphones are bad, or the cable or even the WeGO socket)
That seems to be a hardware issue then (either your Headphones are bad, or the cable or even the WeGO socket)
发表时间 Wed 02 Apr 14 @ 12:20 pm
chemtastic
yes. it came from my headphone only. the master output is okay. i try using another headphone but still produce the same distort noise. i only bought this wego within a week.
发表时间 Wed 02 Apr 14 @ 1:11 pm
chemtastic
okay. now i got a lil bit improvement. i increase the buffer size lil bit by lil bit. but still got tiny little distortion. sound like cut off.
发表时间 Wed 02 Apr 14 @ 1:15 pm
groovindj
Give DPC Latency Checker a run and see if your computer shows any issues that may be affecting things.
(For Windows 8 try LatencyMon instead)
(For Windows 8 try LatencyMon instead)
发表时间 Wed 02 Apr 14 @ 4:13 pm
djdad
chemtastic wrote :
yes. it came from my headphone only. the master output is okay. i try using another headphone but still produce the same distort noise. i only bought this wego within a week.
I am surprised by your reply.
Assuming that you are using the LE version of VirtualDJ, you should have both speakers and headphones connected to the WeGO, so not sure how one stereo Output of the same sound card could come out with distortion and the other one without.
发表时间 Wed 02 Apr 14 @ 8:08 pm
chemtastic
djdad wrote :
I am surprised by your reply.
Assuming that you are using the LE version of VirtualDJ, you should have both speakers and headphones connected to the WeGO, so not sure how one stereo Output of the same sound card could come out with distortion and the other one without.
chemtastic wrote :
yes. it came from my headphone only. the master output is okay. i try using another headphone but still produce the same distort noise. i only bought this wego within a week.
I am surprised by your reply.
Assuming that you are using the LE version of VirtualDJ, you should have both speakers and headphones connected to the WeGO, so not sure how one stereo Output of the same sound card could come out with distortion and the other one without.
okay. what i mean is i use the computer speakers. the speakers is NOT connected to the wego2 but only the headphones. so that's why my computer speakers did not have the distortion sound but ONLY the headphones come out with the distortion.
发表时间 Thu 03 Apr 14 @ 9:28 am
chemtastic
groovindj wrote :
Give DPC Latency Checker a run and see if your computer shows any issues that may be affecting things.
(For Windows 8 try LatencyMon instead)
(For Windows 8 try LatencyMon instead)
ok already done the test. result is:
test interval: 1000us
current latency: 166us
absolute maximun: 328us
发表时间 Thu 03 Apr 14 @ 9:30 am
groovindj
Please refer to page 4 of your WeGO manual - "adjusting the buffer size".
What are your settings there? Buffer size/latency/bit depth/kernel buffers
Note the information in the manual about changing settings to deal with sound issues.
What are your settings there? Buffer size/latency/bit depth/kernel buffers
Note the information in the manual about changing settings to deal with sound issues.
发表时间 Thu 03 Apr 14 @ 9:37 am
chemtastic
i just changed my settings according to the manual but still got a lil bit interrupted sound. my setting now is
buffer size : 704sample
lattency: 15.9ms
bit depth : 24bit
kernel buffers : 2
buffer size : 704sample
lattency: 15.9ms
bit depth : 24bit
kernel buffers : 2
发表时间 Tue 08 Apr 14 @ 4:02 am
groovindj
Try bit depth of 16 bit.
Unless you are mastering your own tracks in 24 bit and have a very high quality speaker system (and amazing ears) it's better to use 16 bit because it's the most common format for commercially available music (CD or download). It also puts less stress on your computer because it doesn't have to convert from one bit rate to another.
Unless you are mastering your own tracks in 24 bit and have a very high quality speaker system (and amazing ears) it's better to use 16 bit because it's the most common format for commercially available music (CD or download). It also puts less stress on your computer because it doesn't have to convert from one bit rate to another.
发表时间 Tue 08 Apr 14 @ 1:11 pm
chemtastic
groovindj wrote :
Try bit depth of 16 bit.
Unless you are mastering your own tracks in 24 bit and have a very high quality speaker system (and amazing ears) it's better to use 16 bit because it's the most common format for commercially available music (CD or download). It also puts less stress on your computer because it doesn't have to convert from one bit rate to another.
Unless you are mastering your own tracks in 24 bit and have a very high quality speaker system (and amazing ears) it's better to use 16 bit because it's the most common format for commercially available music (CD or download). It also puts less stress on your computer because it doesn't have to convert from one bit rate to another.
thanks master. i will try it later. :)
发表时间 Fri 11 Apr 14 @ 2:42 am
djay212
hi i just got a ddj-wego 2 and i cant get the cue to work i press it it comes on but when i want it to play out the speakers (i turn cue off) nothing happens!! PLZ help :-(
发表时间 Wed 27 Jan 16 @ 5:01 am