Blog

VMS4 setup

Thu 25 Nov 10 @ 10:00 pm

Depending on your version of VDJ try the following:

Most versions will not work with hardware controllers such as Home and Pro Basic.

If you are running VDJ7 with 4 decks make sure you have the VMS4 set to 8 out - not 4 out.

In Sound Setup make sure you select advanced configuration and set up as follows:

For Mac:
Deck 1 VMS4 Audio Midi Device Output 1 & 2
Deck 2 VMS4 Audio Midi Device Output 3 & 4
Deck 3 VMS4 Audio Midi Device Output 5 & 6
Deck 4 VMS4 Audio Midi Device Output 7 & 8

For PC:
Deck 1 ADJ ASIO Driver Output 1 & 2
Deck 2 ADJ ASIO Driver Output 3 & 4
Deck 3 ADJ ASIO Driver Output 5 & 6
Deck 4 ADJ ASIO Driver Output 7 & 8

Make sure these lines are set to USB and not ANALOG.

Using the crossfader is not ideal when using 4 decks but you can still assign which deck you want to control with the line select switches in front of the unit.

Some users feel that using the decks as follows is easier: 3, 1, 2, 4

_____________________________________________________________________________________________________________

If you are running VDJ7 with 2 decks make sure you have the VMS4 set to 4 out - not 8 out. Also, line select should be line 2 for channel 2 and line 3 for channel 3. Make sure these lines are set to USB and not ANALOG.

In Sound Setup select the VMS4 as your Sound Card for Mac and PC.


More information at the American Audio VMS4 Discussions


Hope this helps. Let us know if it worked for you.